Abstract:The aims of this study is to comparative analyze the flame resistant of Larix kamperi according to fire retardant paints with different main components. Wood, an eco friendly traditional material, has been proven to reduce carbon, drawing attention as a solution to climate change, an international environmental issue. Wood is used as a material for buildings as furniture, interior, and furniture, and greatly satisfied users who require eco-friendliness. However, wood is a factor that increases the fire load in a fire. In previous studies, the fire vulnerability of Cryptomeria japonica, Pinus densiflora, MDF, OSB, cork board, and plain wood plywood was analyzed. As a result, wood without flame retardant treatment was vulnerable to fire. To compensate for this problem, we intend to secure an evacuation time by delaying the ignition time in case of a fire. Accordingly, Flame retardant treatment is implemented in accordance with Article 20 of ?the Enforcement Decree of the Act on the maintenance and Safety Management of Firefighting Facilities?. The main flame-retardant paint used is bromine, a halogen compound, and has high flame resistant. However, it is subject to environmental regulations due to the problem of soot and smoke generation. Eco friendly fire retardant paint are continuously being developed to escape regulations. Therefore, it is necessary to measure the effect of the flame resistant by treating the developed fire retardant paint for each tree species. So, three types of fire retardant paint with different main components are selected and treated on a larch plywood to analyze flame resistant. In this study, after flame time, after glow time, char length, and char area were measured in accordance with Standard of the Nation Fire Agency of Republic Korea. The main components of fire retardant paint are ammonium polyphosphate, emulsion resin, and phosphorus based mixture. Based on each theoretical application amount, 150g/m2, 180g/m2, and 180g/m2 were applied as the flame retardant paint. As a control group, a test specimen that was not with flame retardant treatment was set. The results are as follows. First, ammonium polyphosphate was the most excellent flame resistant. Second, as a result of flame retardant treatment the phosphorus mixture with the same main ingredient on the same type of larch plywood, the effect of flame resistant was different depending on the technology development of each manufacturer. Third, all larch plywood satisfied the flame resistant regardless of the presence or absence of flame retardant treatment. This seems to be because Larix Kamperi itself has a property that does not burn easily. It is expected that the results of this study will be used as basic data for the production of semi noncombustible material suitable for flame resistant Standard of the Nation Fire Agency of Republic Korea in the future.

Effects of different flame-retardant treatments on the sound absorption properties of low-density fiberboard

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

Flame Resistant of Larch Plywood According to Main Ingredients of Fire Retardant Paint

Mechanical and Fire Properties of Flame-Retardant Laminated Bamboo Lumber Glued with Phenol Formaldehyde and Melamine Urea Formaldehyde Adhesives

Evaluations of the effects of different flame retardants combinations on particleboards produced using urea–formaldehyde resin

Preparation and Modification of Flexible Polyurethane Foam for Effective Flame Resistance and Sound Absorption

Natural silk fibroin based flame retardant LbL-coating for Dongba paper

Toxic Gas and Smoke Generation and Flammability of Flame-Retardant Plywood

Effect of silicon-containing nitrogen and phosphorus flame-retardant system on the mechanical properties and thermal and flame-retardant behaviors of corrugated cardboard

A Study on Fire Retardant and Soundproof Properties of Stainless Steel EAF Reducing Slag Applied to Fiber Reinforced Cement Boards

A Study on the Quantitative Fire Performance Evaluation Method of Building Finishing Materials with a Focus on Medical Facilities

Bio-Based Alkali Lignin Cooperative Systems for Improving the Flame Retardant and Mechanical Properties of Rigid Polyurethane Foam

Analyzing Temperature Distribution Patterns on the Facing and Backside Surface: Investigating Combustion Performance of Flame-Retardant Particle Boards Using Aluminum Hypophosphite, Intumescent, and Magnesium Hydroxide Flame Retardants

Preparation of Organic-Inorganic Phosphorus-Nitrogen-Based Flame Retardants and Their Application to Plywood

Fire Properties of Paper Sheets Made of Cellulose Fibers Treated with Various Retardants

Eco-friendly fiberboards with low formaldehyde content and enhanced mechanical properties produced with activated soybean protein isolate modified urea-formaldehyde resin

Preparation of bisDOPO-NH2-POSS flame retardant and its application to plywood using modified urea-formaldehyde resin

A novel cysteine-based flame retardant for biomass poplar wood density board

Sandwich-structure inspired super-tough and fire-resistant plywood containing vinyl acetate-ethylene based adhesive reinforced by melamine amino trimethyl phosphate and sodium lignosulfonate

Synergistic flame retardant effect of a new N-P flame retardant on poplar wood density board

Combustion behavior, mechanical performance and application for vinyl acetate–ethylene copolymer emulsion containing melamine amino trimethyl phosphate and sodium lignosulfonate