Abstract:Effect of surface treatment on hybrid carbon/ramie epoxy composites. Hybrid polymer composites' lightweight, biodegradability, damping, and cost‐effectiveness have made them popular in recent decades. This study evaluated the raw and alkali‐treated hybrid composite's free vibration studies and mechanical properties by changing the ramie fiber layers (core) from two to four and keeping the carbon fiber layers (top and bottom) constant. Thus, to enhance the mechanical properties, the ramie fiber was treated prior with 2, 3, and 4 wt% of sodium hydroxide (NaOH). These composites were characterized chemically, mechanically, morphologically, and vibrationally via Fourier transform infrared spectroscopy, flexural and tensile tests, field emission scanning electron microscope, and free vibration setup, respectively. The tensile and flexural samples were loaded under quasistatic conditions and tested at 1 and 2 mm/min to evaluate tensile and flexural properties, respectively, and a free vibration test built the natural frequencies and reliable damping factor using clamped‐clamped and clamped‐free boundary conditions. Two layers of carbon fiber (exterior layer) and two layers of ramie fiber (core layer) at 3 wt% NaOH produced maximum tensile strength (523 MPa) and flexural modulus (68,869 MPa) among natural and hybrid composite combinations. This study shows that hybridization and alkaline treatment improve composite material mechanical properties in a specific ratio. Highlights Mechanical and vibration analysis of carbon/ramie hybrid composites was studied. Ramie fiber's surface treatment was carried out in NaOH at 2, 3, and 4 wt%. Surface treatment uplifts mechanical and vibration properties than untreated. Ramie fiber's chemical consequences were analyzed through Fourier transform infrared spectroscopy and field emission scanning electron microscope tests. Surface treatment at 3 wt% builds higher mechanical and vibrational properties.

Erosion wear response of ramie‐epoxy composites using artificial neural network integrated with Taguchi technique

Parametric appraisal and wear prediction of hybrid composites using an integrated soft computing approach

Analysis and prediction of erosion behavior of epoxy composites using statistical and machine learning techniques

Parametric Analysis for Erosion Wear of Waste Marble Dust-Filled Polyester Using Response Surface Method and Neural Networks

Development of machine learning models for the prediction of erosion wear of hybrid composites

Experimental investigation on tribo-performance of rice husk nanoparticles blend epoxy composites reinforced by Borassus flabellifer L . fibre using neural network approach

Artificial Neural Network and Response Surface Methodology Based Analysis on Solid Particle Erosion Behavior of Polymer Matrix Composites

Erosion analysis of fiber reinforced epoxy composites

Wear and Frictional Performance of Epoxy Composites Reinforced with Natural Waste Fibers and Fillers for Engineering Applications

Erosion wear analysis of coconut shell dust filled epoxy composites using computational fluid dynamics and Taguchi method

Optimization and Prediction of Wear Characteristics of Khas Khas Grass/Mesquite Bark Powder/Banana Fiber-Reinforced Epoxy Green Hybrid Composites Using Taguchi Technique

Evaluation of Mechanical and Thermal Properties of Jute and Ramie Reinforced Epoxy-based Hybrid Composites

An examining the static and dynamic mechanical characteristics of milled ramie root reinforced polyester composites

Investigation of tribological properties of biomass developed porous nano activated carbon composites

Effect of Pineapple Leaf and Ramie Fiber Length and Weight Percentage on the Hybrid Polymer Composites Dry Sliding Wear and Air Jet Erosion Studies

Comparative Analysis of Erosive Wear Behaviour of Epoxy, Polyester and Vinyl Esters Based Thermosetting Polymer Composites for Human Prosthetic Applications Using Taguchi Design

Experimental investigation of mechanical properties of epoxy based composites

Experimental investigation of wear of multiwalled carbon nanotube particles-filled poly-ether-ether-ketone matrix composites under dry sliding

Mechanical and vibrational study of raw and surface‐treated ramie fiber hybridized carbon fiber epoxy composites

Characterization of Amino Silane Modified Ramie Fibre, OMMT Nanoclay-reinforced Epoxy Resin Composite

The comparative evaluation of the wear behavior of epoxy matrix hybrid nano-composites via experiments and machine learning models