Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Kota stone dust (KSD) is an unwanted material engendered throughout the process of manufacturing Kota stone. The present work comprises the appropriate consumption of KSD for evolving a composite system with epoxy as the base matrix material. The samples are developed by the hand lay-up technique. The micrographs clearly show that KSD is uniformly distributed within the epoxy matrix and establishes good adhesion with it. With the inclusion of filler, density unwillingly increases by 21.86%, but voids generated are limited to only 4.98% for a maximum filler content of 40 wt. %. A very low water absorption rate of 0.81% for maximum filler loading is observed. The compressive strength and micro-hardness increased by 31.8% and 26.25% respectively. Tensile strength, as well as flexural strength, improves for low filler loading of 20 wt. % and decreases thereafter. The sliding wear tests of the fabricated composites are studied in this research employing fairly advanced nature-inspired Grey wolf optimisation (GWO). The wear tests are based on a real-world issue that is framed in Taguchi L25 OA. A simple linear regression equation demonstrates adequate agreement between predicted and experimental values. The inclusion of KSD decreases the wear rate. Further, it is found that the KSD loading is the utmost significant factor, whereas normal load is the least significant factor that administrates the sliding wear rate of the composite system. Using the grey wolf optimiser, the optimal settings are 2500 m sliding distance, 40 wt.% KSD content, 52 cm/s sliding velocity, and 10 N normal load. The validation test results suggest that GWO is superior to the classical Taguchi approach. The wear loss mechanism is examined under the scanning electron microscope.

Optimization and Prediction of Wear Characteristics of Khas Khas Grass/Mesquite Bark Powder/Banana Fiber-Reinforced Epoxy Green Hybrid Composites Using Taguchi Technique

The effect of various composite and operating parameters in wear properties of epoxy-based natural fiber composites

Parametric optimization and ranking analysis of hybrid epoxy polymer composites based on mechanical, thermo-mechanical and abrasive wear performance

Mechanical Interlocking Approaches to the Prediction of Mechanical and Tribological Behavior of Natural Fiber-Reinforced Polymer Hybrid Nanocomposites or Automotive Applications

Wear and Frictional Performance of Epoxy Composites Reinforced with Natural Waste Fibers and Fillers for Engineering Applications

Experimental investigation of mechanical properties of epoxy based composites

Synergy of hybridization of bauhinia vahlii and kenaf fiber on mechanical and sliding wear properties of epoxy composites: A Grey Taguchi Optimization Study

Grey-Taguchi optimization of mechanical and abrasive wear properties for cotton grass fiber reinforced epoxy composites

Effect of tungsten carbide on mechanical and tribological properties of jute/sisal/E-glass fabrics reinforced natural rubber/epoxy composites

Physical, mechanical and dry sliding wear properties of non-woven viscose fabric epoxy-based polymer composites: An optimization study

Sliding wear behaviour of micro-sized Kota stone dust reinforced epoxy composites using Taguchi method and Grey Wolf optimisation algorithm

Evaluation of mechanical and erosive wear properties of hybrid nano composites basalt/E-glass fiber + MWCNTs/SiO 2

Mechanical (Static and Dynamic) Characterization and Thermal stability of hybrid green composites for Engineering Applications

Comparative Analysis of Erosive Wear Behaviour of Epoxy, Polyester and Vinyl Esters Based Thermosetting Polymer Composites for Human Prosthetic Applications Using Taguchi Design

Dynamic Mechanical Analysis of Banyan/Ramie Fibers Reinforced with Nanoparticle Hybrid Polymer Composite

Effect of fiber layer formation on mechanical and wear properties of natural fiber filled epoxy hybrid composites

Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material

Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications

A Comparative Analysis of the Tribological Performance of Coir, Bamboo and Wood Filler Reinforced Polymer Composites

Experimental investigation of wear of multiwalled carbon nanotube particles-filled poly-ether-ether-ketone matrix composites under dry sliding

Analysis of the Hybrid of Mudar/Snake Grass Fiber-Reinforced Epoxy with Nano-Silica Filler Composite for Structural Application