Abstract:Effect of surface treatment on hybrid carbon/ramie epoxy composites. Hybrid polymer composites' lightweight, biodegradability, damping, and cost‐effectiveness have made them popular in recent decades. This study evaluated the raw and alkali‐treated hybrid composite's free vibration studies and mechanical properties by changing the ramie fiber layers (core) from two to four and keeping the carbon fiber layers (top and bottom) constant. Thus, to enhance the mechanical properties, the ramie fiber was treated prior with 2, 3, and 4 wt% of sodium hydroxide (NaOH). These composites were characterized chemically, mechanically, morphologically, and vibrationally via Fourier transform infrared spectroscopy, flexural and tensile tests, field emission scanning electron microscope, and free vibration setup, respectively. The tensile and flexural samples were loaded under quasistatic conditions and tested at 1 and 2 mm/min to evaluate tensile and flexural properties, respectively, and a free vibration test built the natural frequencies and reliable damping factor using clamped‐clamped and clamped‐free boundary conditions. Two layers of carbon fiber (exterior layer) and two layers of ramie fiber (core layer) at 3 wt% NaOH produced maximum tensile strength (523 MPa) and flexural modulus (68,869 MPa) among natural and hybrid composite combinations. This study shows that hybridization and alkaline treatment improve composite material mechanical properties in a specific ratio. Highlights Mechanical and vibration analysis of carbon/ramie hybrid composites was studied. Ramie fiber's surface treatment was carried out in NaOH at 2, 3, and 4 wt%. Surface treatment uplifts mechanical and vibration properties than untreated. Ramie fiber's chemical consequences were analyzed through Fourier transform infrared spectroscopy and field emission scanning electron microscope tests. Surface treatment at 3 wt% builds higher mechanical and vibrational properties.

Characterization of Amino Silane Modified Ramie Fibre, OMMT Nanoclay-reinforced Epoxy Resin Composite

Mechanical and vibrational study of raw and surface‐treated ramie fiber hybridized carbon fiber epoxy composites

Effect of alkali and silane treatments on properties of green composites based on ramie fibers and cellulose acetate resin

Influence of Interface Modification on the Moisture Absorption and Thermal Resistance of Ramie Fiber/Degradable Epoxy Composites

Effect of Ageing on Silane Surface Modified Cashew Nut De-Oiled Husk Biosilica on Mechanical, Fatigue and Dynamic Mechanical Analysis of Ramie Fiber-Reinforced Vinyl Ester Resin Composite

Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric

Influences of sodium hydroxide and oxalic acid treatments on physical, mechanical, thermal properties, and morphology of ramie fibers

Influence of washing with sodium lauryl sulphate (SLS) surfactant on different properties of ramie fibres

Ramie natural fibre-reinforced biodegradable composites: mechanical, absorption and thermal behaviour study

Surface modification of ramie fibers with silanized CNTs through a simple spray-coating method

Evaluation of Mechanical and Thermal Properties of Jute and Ramie Reinforced Epoxy-based Hybrid Composites

THE IMPROVEMENT OF RAMIE FIBER PROPERTIES AS COMPOSITE MATERIALS USING ALKALIZATION TREATMENT: NaOH CONCENTRATION

Comparative Study of Mechanical Properties and Thermal Stability on Banyan/Ramie Fiber-Reinforced Hybrid Polymer Composite

A Preliminary Study of Extraction and Characterization of Nanocrystalline Cellulose (NCC) from Ramie Fiber

Hot Compaction and Mechanical Properties of Ramie Fabric/Epoxy Composite Fabricated Using Vacuum Assisted Resin Infusion Molding

An examining the static and dynamic mechanical characteristics of milled ramie root reinforced polyester composites

Effect of palmyra sprout fiber and biosilica on mechanical, wear, thermal and hydrophobic behavior of epoxy resin composite

Mechanical, morphological and wear resistance of natural fiber / glass fiber-based polymer composites

Mechanical, wear and fatigue behavior of silane‐treated corncob biosilica toughened epoxy resin composite reinforced with prickly pear short fibers

Mechanical Investigation of Epoxy Based High-Strength Carbon Fiber Braided Composites Modified with Silane Coupling Agents

Nano clay treated jute fiber reinforced epoxy composites: Thermo‐kinetic, morphological and mechanical analysis