Catalytic pyrolysis and in situ carbonization of walnut shells: poly-generation and enhanced electrochemical performance of carbons
Wenjing He,Keling Liu,Lanjun Zhang,Muxin Liu,Zhengjie Ni,Yueyang Li,Duoduo Xu,Minjie Cui,Yibo Zhao
DOI: https://doi.org/10.1039/d4ra01608d
2024-04-16
Abstract:In this study, walnut shell (WS) was used as feedstock, incorporating lithium carbonate (LC), sodium carbonate (SC), potassium carbonate (PC), and potassium hydroxide (PH) as pyrolysis catalysts and carbonization activators. A one-step method that allows catalytic pyrolysis and carbonization to be carried out consecutively under their respective optimal conditions is employed, enabling the concurrent production of high-quality pyrolysis oil, pyrolysis gas, and carbon materials from biomass conversion. The effects of LC, SC, PC, and PH on the yield and properties of products derived from WS pyrolysis as well as on the properties and performance of the resulting carbon materials were examined. The results indicated that the addition of LC, SC, PC, and PH enhanced the secondary cracking of tar, leading to increased solid and gas yields from WS. Additionally, it increased the production of phenolic compounds in bio-oil and H2 in syngas, concurrently yielding a walnut shell-based carbon material exhibiting excellent electrochemical performance. Specifically, when PC was used as an additive, the phenolic content in the pyrolysis oil increased by 27.64% compared to that without PC, reaching 74.9%, but the content of ketones, acids, aldehydes, and amines decreased. The hydrogen content increased from 2.5% (without the addition of PC) to 12.75%. The resulting carbon (WSC-PC) displayed a specific surface area of 598.6 m2 g-1 and achieved a specific capacitance of 245.18 F g-1 at a current density of 0.5 A g-1. Even after 5000 charge and discharge cycles at a current density of 2 A g-1, the capacitance retention rate remained at 98.16%. This method effectively enhances the quality of the biomass pyrolysis oil, gas, and char, contributing to the efficient and clean utilization of biomass in industrial applications.