Abstract:To find an effective correlation between the preparation process and the application performance of symmetric supercapacitors, the relationship between the structural characteristics of biomass porous carbon and the electrochemical performances of supercapacitors was studied. Based on a response surface experimental design, the pore structure of biochar produced by the microwave pyrolysis of sargassum was adjusted through the collaborative optimization of key parameters, and graded sargassum porous carbon (SPC) with different pore characteristics was successfully prepared. Three representative samples, SPC−1, SPC−2, and SPC−3, were selected by systematically exploring the effects of the specific surface area (SSA), pore volume (Vtotal), and pore size distribution on the electrochemical performances. The SSA and V total values of SPC−1 were 1500.50 m 2 g −1 and 1.0513 cm 3 g −1 , respectively. The large number of micropores provided space for electronic storage, allowing it to have an excellent electronic storage capacity. The SSA of SPC−2 was 2019.90 m 2 g −1 , and Vtotal was 1.2241 cm 3 g −1 . The rich micropores resulted in a good charge–discharge rate. The SSA of SPC−3 was as high as 2103.20 m 2 g −1 , and Vtotal was 1.4756 cm 3 g −1 . The micron−level mesopores between the SPC−3 carbon skeletons acted as ion buffer reservoirs to shorten the ion diffusion distance and produce excellent rate performances. Subsequently, the morphology and surface properties of porous carbon samples were characterized. The study revealed that hierarchical porous carbon materials with excellent properties must achieve a balance of the microstructure and surface properties and their influence on the electrochemistry. A higher degree of graphitization could bring about a high pore regularity, thereby optimizing the ion transport kinetics. Heteroatoms could increase redox active surface sites and provide additional pseudocapacitance, but the resulting defect structure formed a large number of pores with high edge roughness in the carbon material, which had a certain negative impact on the capacity properties of the materials. The above findings can provide technical support and a theoretical basis for controlling the pore networks and directionally optimizing the performances of supercapacitors by adjusting the pore structure of biochar.

Self-activation of potassium/iron citrate-assisted production of porous carbon/porous biochar composites from macroalgae for high-performance sorption of sulfamethoxazole

Adsorptive Oxidation of Aqueous Sulfide Onto Zerovalent Cobalt and Magnetite-Supported Biochars: Insights into Synthesis and Mechanistic Performance

In-situ self-activation strategy toward highly porous biochar for supercapacitors: Direct carbonization of marine algae

A three-step process to produce biochar with good magnetism, high specific surface area, and high levels of nitrogen doping for the efficient removal of sulfamethoxazole

Marine macroalgae-derived multielement-doped porous biochars for efficient removal of sulfamethoxazole from aqueous solution: Sorption performance and governing mechanisms

Micro-structure, Surface Properties and Adsorption Capacity of Ball-Milled Cellulosic Biomass Derived Biochar Based Mineral Composites Synthesized Via Carbon-Bed Pyrolysis

Preparation of Porous Biochar and Its Application in Supercapacitors

Porous Carbon Globules with Moss-Like Surfaces from Semi-Biomass Interpenetrating Polymer Network for Efficient Charge Storage

Adsorption of microcystin-LR on the leaves-phyllostachys praecox-derived biochar

Assisting the carbonization of biowaste with potassium formate to fabricate oxygen-doped porous biochar sorbents for removing organic pollutant from aqueous solution

Preparation of hierarchical porous carbon by pyrolyzing sargassum under microwave: The internal connection between structure−oriented regulation and performance optimization of supercapacitors

ZnCl2-KOH modulation of biomass-derived porous carbon for supercapacitors

Sorption of Sulfamethoxazole on Inorganic Acid Solution-Etched Biochar Derived from Alfalfa

Hierarchical porous biochar for persulfate activation: Non-radical pathway for rapid degradation of organic pollutants

Preparation of nitrogen-rich porous carbon by microwave-assisted two-step co-pyrolysis of kapok wood and chlorella vulgaris

Heteroatom-Doped Hierarchically Porous Biochar for Supercapacitor Application and Phenol Pollutant Remediation

CoS x produced in Porphyra biochar by exogenous Co and endogenous S doping to enhance peroxymonosulfate activation for carbamazepine degradation

Insight into synthesis and catalytic performance of mesoporous electroactive biochar for aqueous sulfide adsorptive oxidation

A universal synthesis strategy for facile and scalable of magnetic biochar composite materials for PMS activation: catalytic mechanisms

Enhancing the removal of sulfamethoxazole and microalgal lipid production through microalgae-biochar hybrids

Targeted Construction of Porous Biochar with Well-Developed Pore Structure for High-Performance Co2 Adsorption