Abstract:In this study, an open-cut approach using steel-sheet piles and jet grouting piles for waterproofing was proposed to resolve the problem that ordinary pipe-jacking equipment cannot cross areas with existing anchor cables in soft stratum. The case history of a pipe-jacking project of a sewage treatment plant in the Jinan East Railway Station area was investigated. The mechanical properties of steel-sheet piles, horizontal displacement of piles, and ground surface settlement in the anchor-cable crossing area were investigated based on in situ observations. Numerical investigations were performed using the finite element method (FEM). The effects of existing anchor cables on the mechanical behaviors of retaining structures, deformation variation of the ground, and stability of the excavation were studied. The results indicate that the composite supporting structures of steel-sheet piles and jet grouting piles have a positive effect on waterproofing and deformation control in areas with existing anchor cables. When the steel-sheet pile touched the anchor cable during pile jacking, the compressive stress at the pile cap increased rapidly until it reached 62.8 MPa (the maximum pressure provided by the pile-pressing machine), which is twice the pressure under ordinary conditions. The maximum horizontal displacement of the retaining pile, δ v , increased linearly with the excavation depth H e . Existing anchor structures behind the excavation can restrain the deformation of the ground and retain the structure to a certain extent. The δ v value of the pile with existing anchor structures behind is 6.5 mm or approximately 0.01% of the H e value, which is 70% of that of the retaining pile without existing anchor structures. "Groove type" ground surface settlements are found on both sides of the excavation. The maximum ground settlements δ h are 0.29% H e and 0.05% H e , respectively. The plastic zone at both sides of the excavation bottom extends to the ground surface with an angle of about 45°. When an excavation fails, the plastic zone range in the ground with existing anchor cables is significantly larger than it is in the ground without anchor cables. The key contribution of this research is to provide an effective and low-budget treatment for pipe-jacking crossing through an anchor-cable group region. The findings from this study also provide industry practitioners with a comprehensive guide regarding the specific applications and mechanical performance of the crossing excavation for obstacle treatment.

Development and Application of High-Performance Grouting Materials for Anchoring Pipe in Soft Rock Tunnel

Innovative Design of Pipe Piles Combined Both the Effect of Pile Foundation and Composite Foundation for Soft Soil Treatment

Experimental study of the direct shear characteristics of cement grout under constant normal loading and stiffness boundary conditions

Experiment and Numerical Simulation on Grouting Reinforcement Parameters of Ultra-Shallow Buried Double-Arch Tunnel

Advanced Grouting Model and Influencing Factors Analysis of Tunnels with High Stress and Broken Surrounding Rock

Grouting anchor cable active advanced support technology for mining roadways

Effect of Grouting Reinforcement on Settlement of Existing Tunnels: Case Study of a New Crossing Underpass

Experimental investigation on the reinforcement of a high-pressure jet grouting pile for an ultra-shallow tunnel in a strongly weathered stratum

Numerical Analysis of Grouting of Water-Enriched Karst Highway Tunnel Based on Critical Water-Enriched Height

Construction technologies and mechanical effects of the pipe-jacking crossing anchor-cable group in soft stratum

Study on the whole process application of advanced grouting pipe shed support under urban complex stratum conditions

Study on the optimum grouting materials and their performance in the TBM tunnel collapse reinforcement project

Preliminary Mechanical Evaluation of Grouting Concrete as a Protective Layer for Tunnelling

Analytical Study of the Bolts-Grouting Reinforcement in Cylindrical Lined Tunnels Considering Seepage

Interface bond degradation and damage characteristics of full-length grouted rock bolt in tunnels with high temperature

Experimental Study on Grouting Reinforcement Mechanism of Heterogeneous Fractured Rock and Soil Mass

Application of a novel grouting material for prereinforcement of shield tunnelling adjacent to existing piles in a soft soil area

Development and application of new composite grouting material for sealing groundwater inflow and reinforcing wall rock in deep mine

Research of asphalt–cement materials used for shield tunnel backfill grouting and effect on anti-seismic performance of tunnels

A New Approach to Studying the Mechanical Characteristics of the Anchoring-Grouting System in Broken Surrounding Rock

Experimental Study on Fresh State Properties of Single-Liquid Semi-Inert Synchronous Grouting for Shield Tunnels in Water-Rich Sand Strata