Abstract:For an ultra-shallow buried double-arch tunnel with a large cross-section, the arching effect is difficult to form in surrounding rock, and grouting method is often adopted to reinforce the surrounding rock. Hence, examining the grouting reinforcement parameters is of great significance for potential failure and collapse prevention. The land part of Haicang undersea tunnel was selected as a case study; laboratory experiments, theoretical analysis, and numerical simulation were performed to determine the grouting solid strength and grouting reinforcement parameters. The effects of different water–cement ratios on slurry fluidity, setting time, bleeding rate, and sample strength were studied by laboratory experiments. A method was proposed to determine the shear strength parameters of grouted surrounding rock through the grout water–cement ratio and the unconfined compressive strength of the rock mass. Numerical simulations were performed for grouting reinforcement layer thickness and the water–cement ratios. The deformation and stability law of tunnel surrounding rock and its influence on surrounding underground pipelines were obtained considering the spatial effect of tunnel excavation and grouting reinforcement. The reasonable selection range of grouting reinforcement parameters was proposed. The initial setting time and bleeding rate of cement slurry increased with the increasing water–cement ratio, while the viscosity of cement slurry and sample strength decreased with the increasing water–cement ratio. The shear strength parameters of grouted surrounding rock were determined by the water–cement ratio of grout and unconfined compressive strength of rock mass before grouting. When the thickness of grouting reinforcement layer h = 1.5 m and the water–cement ratio of grout was suggested η = 0.85, the surface settlement, the deformation of the vault, and the deformation of the nearby pipeline all met the design. Moreover, the construction requirements were more economical. Research results can provide a reference for the selection of grouting reinforcement parameters for similar projects.

Research of asphalt–cement materials used for shield tunnel backfill grouting and effect on anti-seismic performance of tunnels

Influences of grouting heave on overlying structures in shield tunneling

STUDY OF GROUND HEAVE AND SUBSIDENCE INDUCED BY SHIELD TUNNELLING IN SOFT GROUND

Analysis and control of ground settlement of embankments in construction of cross-river shield tunnels

Study on the Influence of Back-fill Grouting Parameters in Unsaturated Strata on the Seismic Performance of Shield Tunnels

Effect of Grouting Reinforcement on Settlement of Existing Tunnels: Case Study of a New Crossing Underpass

Experimental study of the direct shear characteristics of cement grout under constant normal loading and stiffness boundary conditions

Earth Pressure and Internal Forces of Tunnel Lining in Jet Grouting Reinforced Mud Stratum

A state-of-art review on development and progress of backfill grouting materials for shield tunneling

Selection of backfill grouting materials and ratios for shield tunnel considering stratum suitability

Characteristics and Countermeasures of Tunnel Heave Due to Large-Diameter Shield Tunneling Underneath

A literature review on properties and applications of grouts for shield tunnel

Experimental Study of High Performance Synchronous Grouting Materials Prepared with Clay

Model study on backfill grouting in shield tunnels based on fractal theory

Remediation of Damaged Shield Tunnel Using Grouting Technique: Serviceability Improvements and Prevention of Potential Risks

Research and implementation of eco-grouting material derived from shield tunneling muck

Study on the optimum grouting materials and their performance in the TBM tunnel collapse reinforcement project

Application of a novel grouting material for prereinforcement of shield tunnelling adjacent to existing piles in a soft soil area

Experiment and Numerical Simulation on Grouting Reinforcement Parameters of Ultra-Shallow Buried Double-Arch Tunnel

Study on the shear strength characteristics and source mechanism of early-age shield synchronous grouting materials

Influence of synchronous grouting on surrounding sandy cobbles during shield tunnelling process: Insights from a scaled model test