Abstract:Highlights • Experiments of a large-scale reinforced concrete wall damaged by an explosively formed projectile (EFP) are conducted. • A three-dimensional (3D) numerical model is established considering the combined load of EFP penetration and explosion impact. • Crater diameter and crater depth of the reinforced concrete wall are better reproduced by the Riedel-Hiermaier-Thoma (RHT) model with modified parameters. • Effects of EFP penetration and explosion impact on the damage of the reinforced concrete wall are discussed respectively. • Effects of steel bars and impact positions on the impact performance of EFP are further numerically discussed. To quickly break through a reinforced concrete wall and meet the damage range requirements of rescuers entering the building, the combined damage characteristics of the reinforced concrete wall caused by EFP penetration and explosion shock wave were studied. Based on LS-DYNA finite element software and RHT model with modified parameters, a 3D large-scale numerical model was established for simulation analysis, and the rationality of the material model parameters and numerical simulation algorithm were verified. On this basis, the combined damage effect of EFP penetration and explosion shock wave on reinforced concrete wall was studied, the effect of steel bars on the penetration of EFP was highlighted, and the effect of impact positions on the damage of the reinforced concrete wall was also examined. The results reveal that the designed shaped charge can form a crater with a large diameter and high depth on the reinforced concrete wall. The average crater diameter is greater than 67 cm (5.58 times of charge diameter), and crater depth is greater than 22 cm (1.83 times of charge diameter). The failure of the reinforced concrete wall is mainly caused by EFP penetration. When only EFP penetration is considered, the average diameter and depth of the crater are 54.0 cm (4.50 times of charge diameter) and 23.7 cm (1.98 times of charge diameter), respectively. The effect of explosion shock wave on crater depth is not significant, resulting in a slight increase in crater depth. The average crater depth is 24.5 cm (2.04 times of charge diameter) when the explosion shock wave is considered. The effect of explosion shock wave on the crater diameter is obvious, which can aggravate the damage range of the crater, and the effect gradually decreases with the increase of standoff distance. Compared with the results for a plain concrete wall, the crater diameter and crater depth of the reinforced concrete wall are reduced by 5.94% and 9.96%, respectively. Compared to the case in which the steel bar is not hit, when the EFP hit one steel bar and the intersection of two steel bars, the crater diameter decreases by 1.36% and 5.45% respectively, the crater depth decreases by 4.92% and 14.02% respectively. The EFP will be split by steel bar during the penetration process, resulting in an irregular trajectory.

Collapse of concrete target subjected to embedded explosion of shelled explosive

Anti-explosion Tests and Numerical Simulations of Ultra-High Toughness Cementitious Composites Subjected to Blast by Embedded Explosives

Spallation Mechanism of RC Slabs under Contact Detonation

Concrete Spalling Behavior and Damage Evaluation of Concrete Members with Different Cross-sectional Properties under Contact Explosion

Damage behavior of concrete members subjected to underwater contact explosion

Explosion Spalling of Reinforced Concrete Slabs with Contact Detonations

Failure mode and stress wave propagation in concrete target subjected to a projectile penetration followed by charge explosion: Experimental and numerical investigation

Experimental and numerical study of corrugated steel-plain concrete composite structures under contact explosions

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Experiment and Numerical Investigations of Ultra-High Toughness Cementitious Composite Slabs under Contact Explosions

Investigation of the Fracture and Fragmentation of Implosively Driven Thin-Walled Cylindrical Shell: From Thermodynamic Analysis to CDEM Simulation

Resistance of composite target against combined effects of large caliber projectile penetration and successive charge explosion

Experimental Investigation and Numerical Simulation on the Blast Resistance of Reactive Powder Concrete Subjected to Blast by Embedded Explosive

Numerical Simulation and Analysis of Shelled Explosive Penetrated but Not Detonated

Expansion And Fracture Of Fragmenting Warhead Shells Of Various Materials Under A Cl-20 Explosive Charge

An Innovative Failure Criterion for Metal Cylindrical Shells under Explosive Loads

Constitutive modelling of concrete material subjected to low-velocity projectile impact: insights into damage mechanism and target resistance

Damage of a large-scale reinforced concrete wall caused by an explosively formed projectile (EFP)

Numerical simulation analysis of damage mode of concrete gravity dam under close-in explosion

Modelling damage mechanisms of concrete under high confinement pressure

Blast-Resistance and Damage Evaluation of Concrete Gravity Dam Exposed to Underwater Explosion: Considering the Initial Stress Field