Abstract:In short-carbon-fiber-reinforced polyamide 66 articles shaped by 3D printing (3D-SCFRPA66), the interfaces between printed layers are often susceptible to damage, and the composite is excessively brittle. Therefore, a novel treatment for 3D-printed short-carbon-fiber-reinforced polyamide (3D-SCFRPA66) using homogeneous low-potential electron beam irradiation (HLEBI) to enhance tensile properties was investigated. In 3D-SCFRPA66 samples, ductility was measured based on the following parameters: strain at tensile strength (corresponding to homogeneous deformation) (εts) and resistance energy to homogeneous deformation, a measure of toughness (Ehd), which were both substantially increased. An HLEBI dose of 43.2 kGy at an acceleration potential of 210 kV for the finished 3D-SCFRPA66 samples increased the εts and Ehd values from 0.031 and 1.20 MPa·m for the untreated samples to 0.270 and 6.05 MPa·m for the treated samples, increases of 771% and 504%, respectively. Higher HLEBI doses of 86, 129, or 215 kGy also increased the εts and Ehd values to lesser degrees. Electron spin resonance (ESR) data in the literature show that HLEBI creates dangling bonds in Nylon 6. Since PA66 and Nylon 6 are constructed of C, N, and O and have similar molecular structures, HLEBI apparently severs the (-C-N-) bonds in the backbone of PA66, which have the lowest bond-dissociation energy (BDE) of ~326 to 335 kJ mol−1. This shortens the PA66 chains for higher ductility. In addition, for Nylon 6, X-ray photoelectron spectroscopy (XPS) data in the literature show that HLEBI reduces the N peak while increasing the C peak, indicating the occurrence of shortening chains via dangling bond formation accompanied by increases in crosslinking with carbon bonds. However, caution is advised, since HLEBI was found to decrease the tensile strength (σts) and initial elasticity ([dσ/dε]i) of 3D-SCFRPA66. This tradeoff can possibly allow the HLEBI dose to be adjusted for the desired ductility and strength while minimizing energy consumption.

Effects of Irradiation Dose of Sheet-Like Electron Beam and its Cathode Voltage on Impact Strength of Carbon Fiber Reinforced Thermoplastic Polyamide just before Shipping

Effect of Irradiation Grafting Epoxy on Surface Characteristics of Carbon Fibers and Mechanical Properties of Composites

The Effects of Irradiation Cross-Linking on the Thermal Degradation and Flame-Retardant Properties of the Hdpe/Eva/Magnesium Hydroxide Composites

A New Strengthening Process for Carbon-Fiber-Reinforced Thermoplastic Polyphenylene Sulfide (CFRTP-PPS) Interlayered Composite by Electron Beam Irradiation to PPS Prior to Lamination Assembly and Hot Press

Effect of Electron Beam Irradiation on the Thermal and Mechanical Properties of Ethylene-Vinyl Acetate Copolymer/polyamide Blends

Effect of Electron Beam Irradiation on Thermal and Mechanical Properties of Polyamide Copolymer/Multiwall Carbon Nanotube Composites

Effect of He2+ ion irradiation on the mechanical properties of automated fibre placement (AFP) CF-PEEK thermoplastics composites

Effect of Electron Beam Irradiation on the Mechanical and Thermal Properties of Ternary Polyamide Copolymer

Effect of electron beam irradiation on thermal and mechanical properties of epoxy polymer

Comparative Study on the Effect of Electron Beam Irradiation on the Physical Properties of Ethylene-Vinyl Acetate Copolymer Composites

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Roles of modified polyethylene addition and electron beam treatment on the interfacial, thermal, mechanical, and electrical properties of polyethylene/short carbon fiber composites

High‐density Polyethylene/carbon Black Conductive Composites. II. Effect of Electron Beam Irradiation on Relationship Between Resistivity–temperature Behavior and Volume Expansion

Irradiation multi-scale damage and interface effects of 3D braided carbon fiber/epoxy composites subjected to high dose γ-rays

Enhancement on Physical Properties of Flame Retarded Ethylene-Vinyl Acetate Copolymer/ferric Pyrophosphate Composites Through Electron Beam Irradiation

Study on electron beam cross‐linked ethylene‐tetrafluoroethylene copolymer‐insulated cables for aerospace applications: Mechanical performance, crystallization kinetics, and fluoride precipitation

Effect of Electron Beam Irradiation on Poly(vinylidene Fluoride) Films at the Melting Temperature

Novel Treatment of 3D-Printed Short-Carbon-Fiber-Reinforced Polyamide (3D-SCFRPA66) using Homogeneous Low-Potential Electron Beam Irradiation (HLEBI) and Ductility Enhancement

Irradiation Dose Control for Polymer‐matrix Composites Fabricated by in Situ Curing with Low‐energy Electron Beam

Effect Of Electron Beam Irradiation On The Silk Fibroin Fiber/Poly(Epsilon-Caprolactone) Composite

Effects of Electron Beam Irradiation and Multi-Functional Monomer/co-Agents on the Mechanical and Thermal Properties of Ethylene-Vinyl Acetate Copolymer/polyamide Blends