Abstract:The demand for high-energy-density lithium batteries (LBs) that work under a wide temperature range (−40 to 60 °C) has been increasing recently. However, the conventional lithium hexafluorophosphate (LiPF6)-based ester electrolyte with a solvent-based solvation structure has limited the practical application of LBs under extreme temperature conditions. In this work, a novel localized high-concentration electrolyte (LHCE) system is designed to achieve the anion-containing solvation structure with less free solvent molecules using lithium difluorophosphate (LiPO2F2) as a lithium salt, which enables wide-temperature electrolyte for LBs. The optimized solvation structure contributes to the cathode–electrolyte interface (CEI) with abundant LiF and P–O components on the surface of the LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode, effectively inhibiting the decomposition of electrolyte and the dissolution of transition-metal ions (TMIs). Moreover, the weakened Li+–dipole interaction is also beneficial to the desolvation process. Therefore, the 4.3 V Li||NCM523 cell using the modified electrolyte maintains a high capacity retention of 81.0% after 200 cycles under 60 °C. Meanwhile, a considerable capacity of 70.9 mAh g–1 (42.0% of that at room temperature) can be released at an extremely low temperature of −60 °C. This modified electrolyte dramatically enhances the electrochemical stability of NCM523 cells by regulating the solvation structure, providing guidelines for designing a multifunctional electrolyte that works under a wide temperature range.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c02221.LSV, ion conductivity, and viscosity tests of different electrolytes under 25 °C; details of the theoretical calculation; electrochemical performance of 4.3 V Li||NCM523 cell in different HCEs (25 °C and 60 °C); CV of the Li||NCM523 battery in two electrolytes; SEM, XPS, and EDS characterizations of electrodes cycled under 4.3V (60 °C); SEM, XPS, and EDS characterizations of electrodes cycled under 4.5V (25 °C); and performance of Li||Cu half-cells in 301, 1.4M LG, and 1.4M LGH* electrolyte (25 °C) (PDF)This article has not yet been cited by other publications.

Synergistic interphase modification with dual electrolyte additives to boost cycle stability of high nickel cathode for all-climate battery

Revolutionizing multifunctional electrolyte additive design and synthesis for high-voltage nickel-rich batteries in diverse climates

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Electrolyte Engineering to Construct Robust Interphase with High Ionic Conductivity for Wide Temperature Range Lithium Metal Batteries

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

Interphase‐Designable Additive‐Enabled Ethylene Carbonate‐Free Electrolyte for Wide‐Temperature, Long‐Cycling, High‐Voltage Lithium Metal Batteries

Enhancing Compatibility Between LiNi0.8Co0.1Mn0.1O2 and LiPF6-based Electrolyte Via Bis(trimethylsilyl)oxalate Additive

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Engineering A Boron-Rich Interphase with Nonflammable Electrolyte Toward Stable Li||NCM811 Cells under Elevated Temperature

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Engineering an Insoluble Cathode Electrolyte Interphase Enabling High Performance NCM811//Graphite Pouch Cell at 60 °C

Engineering A Boron‐Rich Interphase with Nonflammable Electrolyte Towards Stable Li||NCM811 Cells Under Elevated Temperature

High-voltage electrolyte design for a Ni-rich layered oxide cathode for lithium-ion batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

A Functional Electrolyte Containing P-phenyl Diisothiocyanate (PDITC) Additive Achieves the Interphase Stability of High Nickel Cathode in a Wide Temperature Range

Improving interfacial stability of ultrahigh-voltage lithium metal batteries with single-crystal Ni-rich cathode via a multifunctional additive strategy

Tailoring Electrolytes to Enable Low-Temperature Cycling of Ni-Rich NCM Cathode Materials for Li-Ion Batteries

Mild and Controllable Solid Electrolyte Interphase Formation for High-Voltage Lithium Metal Batteries in a Wide-Temperature Range from −40 °C to 80 °C

Anion-Containing Solvation Structure Reconfiguration Enables Wide-Temperature Electrolyte for High-Energy-Density Lithium-Metal Batteries

Bifunctional Nitrile-Borate Based Electrolyte Additive Enables Excellent Electrochemical Stability of Lithium Metal Batteries with Single-Crystal Ni-rich Cathode at 4.7 V

Synergistic Effect of TMSPi and FEC in Regulating the Electrode/Electrolyte Interfaces in Nickel-Rich Lithium Metal Batteries.