Abstract:This work proposes a wide‐temperature localized high‐concentration electrolytes (LHCE) with a high safety feature. A particular electrolyte additive of the electrolytes, 1‐fluoroethyl methyl carbonate (1FEMC), is explored to improve the performance of electrolytes with a better interfacial stability than the previously reported multifunctional additive (4,5‐difluoro‐1,3‐dioxolan‐2‐one DFEC). The 1FEMC achieves an inorganic‐dominated solid electrolyte interphase at both cathode and anode, which leads to an uniform lithium deposition and inhibits the electrolyte decomposition as well as cathode degradation. This LHCE achieves over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Additionally, NCM811||Li cells maintains 84% discharge capacity at −20 °C (compared with that at room temperature). This work presents a research foundation for designing safer Li‐metal batteries that operate in a wide temperature range. The increasing need for energy storage devices with high energy density has led to significant interest in Li‐metal batteries (LMBs). However, the use of commercial electrolytes in LMBs is problematic due to their flammability, inadequate performance at low temperatures, and tendency to promote the growth of lithium dendrites and other flaws. This study introduces a localized high‐concentration electrolyte (LHCE) that addresses these issues by employing non‐flammable electrolyte components and incorporating carefully designed additives to enhance flame retardancy and low‐temperature performance. By incorporating additives to optimize the electrolyte, it is possible to attain inorganic‐dominated solid electrolyte interphases on both the cathode and anode. This achievement results in a uniform deposition of lithium, as well as the suppression of electrolyte decomposition and cathode deterioration. Consequently, this LHCE achieve over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Furthermore, NCM811||Li cells maintain 84% discharge capacity at −20 °C, in comparison to the capacity at room temperature. The utilization of this electrolyte presents novel perspectives for the safe implementation of LMBs.

Mild and Controllable Solid Electrolyte Interphase Formation for High-Voltage Lithium Metal Batteries in a Wide-Temperature Range from −40 °C to 80 °C

Partially sacrificial hybrid diluent regulated electrolytes boosting wide-temperature Li metal batteries

An Ether‐Based Electrolyte Solvation Strategy for Long‐Term Stability and Ultra‐Low Temperature Li‐Metal Batteries

A Semisolvated Sole-Solvent Electrolyte for High-Voltage Lithium Metal Batteries.

Anion-Containing Solvation Structure Reconfiguration Enables Wide-Temperature Electrolyte for High-Energy-Density Lithium-Metal Batteries

Stable Low-Temperature Lithium Metal Batteries with Dendrite-Free Ability Enabled by Electrolytes with Cooperative Li+-Solvation

Moderate solvation structure of lithium ions for high-voltage lithium metal batteries at −40 oC

Achieving Uniform Li Deposition and Suppressed Electrolyte Flammability in Li‐Metal Batteries via Designing Localized High‐Concentration Electrolytes

Strongly Solvating Triglyme-based Electrolyte Realizes Stable Lithium Metal Batteries at High-Voltage and High-Temperature

Intermolecular Interactions Mediated Nonflammable Electrolyte for High‐Voltage Lithium Metal Batteries in Wide Temperature

Single-Solvent Ionic Liquid Strategy Achieving Wide-Temperature and Ultra-High Cut-Off Voltage for Lithium Metal Batteries

Regulating Non‐Equilibrium Solvation Structure in Locally Concentrated Ionic Liquid Electrolytes for Wide‐Temperature and High‐Voltage Lithium Metal Batteries

Tuning the Solution Structure of Electrolyte for Optimal Solid-Electrolyte-interphase Formation in High-Voltage Lithium Metal Batteries

Electrolyte Engineering to Construct Robust Interphase with High Ionic Conductivity for Wide Temperature Range Lithium Metal Batteries

Interphase‐Designable Additive‐Enabled Ethylene Carbonate‐Free Electrolyte for Wide‐Temperature, Long‐Cycling, High‐Voltage Lithium Metal Batteries

Solvation Structure and Derived Interphase Tuning for High‐Voltage Ni‐Rich Lithium Metal Batteries with High Safety Using Difluorinated Ionic Liquid Based Dual‐Salt Electrolytes

Regulating the weak solvation structure in electrolyte for high-rate Li-metal batteries at low temperature

Anionic Coordination Manipulation of Multilayer Solvation Structure Electrolyte for High‐Rate and Low‐Temperature Lithium Metal Battery

Regulating Weak Solvation Structure in Electrolyte for High-Rate Li-Metal Batteries at Low Temperature

Novel Propylene Carbonate Based Localized High Concentration Electrolyte with High Voltage, Flame Retardant and Wide Temperature Characteristics Enables Excellent Electrochemical Performances of Lithium Metal Batteries

Synergistic Effect of Temperature and Electrolyte Concentration on Solid‐State Interphase for High‐Performance Lithium Metal Batteries