Abstract:The demand for high-energy-density lithium batteries (LBs) that work under a wide temperature range (−40 to 60 °C) has been increasing recently. However, the conventional lithium hexafluorophosphate (LiPF6)-based ester electrolyte with a solvent-based solvation structure has limited the practical application of LBs under extreme temperature conditions. In this work, a novel localized high-concentration electrolyte (LHCE) system is designed to achieve the anion-containing solvation structure with less free solvent molecules using lithium difluorophosphate (LiPO2F2) as a lithium salt, which enables wide-temperature electrolyte for LBs. The optimized solvation structure contributes to the cathode–electrolyte interface (CEI) with abundant LiF and P–O components on the surface of the LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode, effectively inhibiting the decomposition of electrolyte and the dissolution of transition-metal ions (TMIs). Moreover, the weakened Li+–dipole interaction is also beneficial to the desolvation process. Therefore, the 4.3 V Li||NCM523 cell using the modified electrolyte maintains a high capacity retention of 81.0% after 200 cycles under 60 °C. Meanwhile, a considerable capacity of 70.9 mAh g–1 (42.0% of that at room temperature) can be released at an extremely low temperature of −60 °C. This modified electrolyte dramatically enhances the electrochemical stability of NCM523 cells by regulating the solvation structure, providing guidelines for designing a multifunctional electrolyte that works under a wide temperature range.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c02221.LSV, ion conductivity, and viscosity tests of different electrolytes under 25 °C; details of the theoretical calculation; electrochemical performance of 4.3 V Li||NCM523 cell in different HCEs (25 °C and 60 °C); CV of the Li||NCM523 battery in two electrolytes; SEM, XPS, and EDS characterizations of electrodes cycled under 4.3V (60 °C); SEM, XPS, and EDS characterizations of electrodes cycled under 4.5V (25 °C); and performance of Li||Cu half-cells in 301, 1.4M LG, and 1.4M LGH* electrolyte (25 °C) (PDF)This article has not yet been cited by other publications.

Tailoring Electrolytes to Enable Low-Temperature Cycling of Ni-Rich NCM Cathode Materials for Li-Ion Batteries

Enabling the Low-Temperature Cycling of NMC||Graphite Pouch Cells with an Ester-Based Electrolyte

Colloid Electrolyte with Changed Li+ Solvation Structure for High‐Power, Low‐Temperature Lithium‐Ion Batteries

Enhancing Li+ Transport in NMC811||Graphite Lithium‐Ion Batteries at Low Temperatures by Using Low‐Polarity‐Solvent Electrolytes

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Advanced Electrolytes for Fast‐Charging High‐Voltage Lithium‐Ion Batteries in Wide‐Temperature Range

Anion‐Dominated Conventional‐Concentrations Electrolyte to Improve Low‐Temperature Performance of Lithium‐Ion Batteries

Enabling Ultra‐Low‐Temperature (‐70 °C) Lithium‐Ion Batteries: Advanced Electrolytes Utilizing Weak‐Solvation and Low‐Viscosity Nitrile Cosolvent

Anion-Containing Solvation Structure Reconfiguration Enables Wide-Temperature Electrolyte for High-Energy-Density Lithium-Metal Batteries

Synergetic modulation on solvation structure and electrode interface to achieve lithium-ion batteries cycled at ultra-low temperature

Low-temperature strategy to synthesize single-crystal LiNi0.8Co0.1Mn0.1O2 with enhanced cycling performances as cathode material for lithium-ion batteries

Synergy of Highly Reversible Ω-Li3v2o5 Anodes and Fluorine-Containing Additive Electrolytes Promises Low-Temperature-Tolerant Li-Ion Batteries

Solvation and Interfacial Engineering Enable-40 degrees C Operation of Graphite/NCM Batteries at Energy Density over 270 wh kg(-g)

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Concentration controlling of carboxylic ester‐based electrolyte for low temperature lithium‐ion batteries

Interface Engineering via Regulating Electrolyte for High‐Voltage Layered Oxide Cathodes‐Based Li‐Ion Batteries

Reconstructing Inorganic‐Rich Interphases by Nonflammable Electrolytes for High‐Voltage and Low‐Temperature LiNi0.5Mn1.5O4 Cathodes

Rational Design of Fluorinated Electrolytes for Low Temperature Lithium‐Ion Batteries

Competitive Coordination of Ternary Anions Enabling Fast Li‐Ion Desolvation for Low‐Temperature Lithium Metal Batteries

Solvation and Interfacial Engineering Enable -40 °C Operation of Graphite/NCM Batteries at Energy Density over 270 Wh kg-1