Abstract:As a common necessity, masks have been used a lot in recent years, and the comprehensive utilization of waste masks has become a research priority in the post-COVID-19 pandemic era. However, traditional disposal methods suffer from a range of problems, including poor utilization and insecurity. To explore new solution ideas and efficiently utilize waste resources, waste masks and biomass wastes were used as raw materials to prepare mask-based biochar (WMB), bio-oil, and pyrolytic gas via oxygen-limited co-pyrolysis in this study. The obtained solid–liquid–gas product was systematically characterized to analyze the physicochemical properties, and the adsorption properties and mechanisms of WMB on the environmental endocrine bisphenol A (BPA) were investigated. The co-pyrolysis mechanisms were also studied in depth. Furthermore, the strengths and weaknesses of products prepared by co-pyrolysis and co-hydrothermal synthesis were discussed in comparison. The results indicated that the waste masks could shape the microsphere structure, leading to richer surface functional groups and stable mesoporous of WMB. Here, the risk of leaching of secondary pollutants was not detected. The theoretical maximum adsorption of BPA by WMB was 28.73 mg·g−1. The Langmuir and Pseudo-second-order models optimally simulated the isothermal and kinetic adsorption processes, which are a composite of physicochemical adsorption. Simultaneous pyrolysis of mask polymers with biomass polymers produces bio-oil and pyrolytic gas, which is rich in high-quality aliphatic and aromatic compounds. This could have potential as an energy source or chemical feedstock. The co-pyrolysis mechanisms may involve the depolymerization of waste masks to produce hydrocarbons and H radicals, which in turn undergo multi-step cleavage and oligomerization reactions with biomass derivatives. It is recommended to use the co-pyrolysis method to dispose of waste masks, as the products obtained are significantly better than those obtained by the co-hydrothermal method. This work provides a new contribution to the resourcing of waste masks into high-quality products.

Syngas Production from Protective Face Masks through Pyrolysis/Steam Gasification

Hydrogen-rich gas production from disposable COVID-19 mask by steam gasification

Valorizing disposable face masks into non-condensable hydrocarbon gases via optimal reactor configurations in thermal pyrolysis

Dynamic pyrolytic reaction mechanisms, pathways, and products of medical masks and infusion tubes

Gas Production from Polyethylene Terephthalate Using Rotating Arc Plasma

Preparing Fuel-Range Chemicals via the Direct and Selective Pyrolysis of Disposable Mask Waste for Sustainable Environment

Pyrolysis and combustion kinetics of disposable surgical face mask produced during Covid-19 pandemic

Mechanistic Analysis of Hydrogen-Rich Co-Gasification of Pine Wood and Polypropylene-Based Waste Masks Using Fe/Dol Catalyst

Energy-saving COVID-19 biomedical plastic waste treatment using the thermal - Catalytic pyrolysis

Facemasks and ferrous metallurgy: improving gasification reactivity of low-volatile coals using waste COVID-19 facemasks for ironmaking application

Thermochemical treatment of daily COVID-19 single-use facemask waste: Power generation potential and environmental impact analysis

Pyrolysis of waste surgical masks into liquid fuel and its life-cycle assessment

Recovery material from a new designed surgical face mask: A complementary approach based on mechanical and thermo-chemical recycling

A Hybrid Pre-Assessment Assists in System Optimization to Convert Face Masks into Carbon Nanotubes and Hydrogen

Prediction of Chemical Composition of Gas Combustion Products from Thermal Waste Conversion

Two Birds with One Stone: High-Quality Utilization of COVID-19 Waste Masks into Bio-Oil, Pyrolytic Gas, and Eco-Friendly Biochar with Adsorption Applications

A comprehensive study of facemasks pyrolysis using Py-GC/MS, kinetic analysis and ANN modeling

Co-pyrolysis characteristics and synergistic effects of masks and peanut shells in the preparation of light aromatic hydrocarbons under catalyst

Low-Pressure Hydrothermal Processing of Disposable Face Masks into Oils

Thermodynamic and economic analysis of a hydrogen production process from medical waste by plasma gasification

Hydrogen-Rich Syngas Production from Waste Textile Gasification Coupling with Catalytic Reforming under Steam Atmosphere