Biomass steam gasification for hydrogen-rich syngas production over fly ash-based catalyst pretreated by coupling of washing and calcination
Ziming Mo,Yao He,Jingyong Liu,Jianhua Tu,Detao Li,Changsong Hu,Qian Zhang,Kaige Wang,Tiejun Wang
DOI: https://doi.org/10.1016/j.ijhydene.2023.07.086
IF: 7.2
2023-07-27
International Journal of Hydrogen Energy
Abstract:Biomass gasification to produce syngas is promising, but the limited hydrogen content of the syngas restricts its potential applications. This study proposed an efficient thermochemical approach that used cost-effective fly ash pretreated with washing and calcination (WCFA) as a catalyst to enhance hydrogen-rich syngas production from biomass steam gasification. Catalyst characterizations indicated that washing removed most chloride salts in raw fly ash by dissolution, and subsequent calcination decomposed Ca-containing compounds into CaO, resulting in smaller catalyst grains, more developed pore structure, and greater capability and reaction rate of CO 2 sorption. With WCFA, the H 2 release during gasification was prolonged by ∼10 min and its release peak increased by over 1.5 times, compared to no catalyst. Consequently, the cold gas efficiency, syngas yield, and H 2 /CO ratio increased from 53%, 792 mL/g biomass , and 0.39 for no catalyst to 72%, 1132 mL/g biomass , and 1.05 for WCFA. The WCFA catalyst calcined at 800 °C for 60 min was optimal for H 2 formation, due to its enriched CaO composition and improved porosity, which effectively catalyzed volatiles cracking/reforming and absorbed CO 2 to lead the chemical equilibrium of water gas shift reaction move foward.
energy & fuels,electrochemistry,chemistry, physical