Abstract:As the most discharged solid waste in China; coal gangue (CG) occupies a considerable amount of land and severely pollutes the environment. Large-scale production, low added value of products, and lack of innovative disposal methods have lead to the difficult situation of effective utilization of CG. Therefore, it is very important to develop new ways to utilize CG on a large scale and with high-valued. This paper proposes a new method for reducing the environmental burden and realizing a high-value utilization of CG. The study was based on a two-stage utilization approach. Raw CG was first used to prepare solid-waste-based sulfoaluminate cement (WSAC). Then the prepared WSAC combined with self-ignited coal gangue (SCG) was used to prepare a high-strength pervious concrete (HSPC). The mechanical properties, mineral composition, and microstructure of the prepared WSAC clinker were analyzed. The results show that mortar from the prepared WSAC clinker had a reasonable mineral composition, well-developed crystals, and a compressive strength of 55.2 MPa at three days, which meets the standard for 52.5 N ordinary Portland cement. Furthermore, the influence of the water-binder (W/B) ratio, a ggregate-binder (A/B) ratio, and different SCG content on the performance of HSPC was studied. It was observed that the optimal HSPC was prepared when the W/B ratio and the A/B ratio were 0.22 and 4.0, respectively. Compared with traditional pervious concrete, the prepared HSPC has both high strength and high water permeability, and the obtained compressive strength is 34.8 MPa, a connected porosity of 19.80%, a water permeability of 7.95 mm/s, and a hardening density of 1930.8 kg/m3. An SCG content of 10%–20% was considered to the best dosage range for the preparation of HSPC. Furthermore, the freeze–thaw cycle analysis and abrasion resistance test indicated that HSPC with 10% SCG content has acceptable durability. Finally, the environmental impact of HSPC was evaluated through heavy-metal leaching tests, revealing that HSPC has a good curing ability on heavy metals and the leaching index was lower than the limit specified by the regulations, which reflects the environmental friendliness. Thus, this paper presents a low-cost and promising method for the resourceful utilization of CG and production of a sustainable pavement material. In addition, further research is needed before the application of this material to explore its durability and practicality in a specific environment.

Preparation of a low-carbon plant-compatible ecological concrete with fertilizer self-release characteristics based on multi-solid waste co-recycling and its environmental impact

Eco-friendly solid waste-based cementitious material containing a large amount of phosphogypsum: Performance optimization, micro-mechanisms, and environmental properties

Mechanical and vegetative performance of ecological concrete with nutrient aggregates

Innovative synthesis of low-carbon cemented backfill materials through synergistic activation of solid wastes: An integrated assessment of economic and environmental impacts

Alkalinity Regulation and Optimization of Cementitious Materials Used in Ecological Porous Concrete

Phosphogypsum-Based Ultra-Low Basicity Cementing Material

Total Recycling of Low-Quality Urban-Fringe Construction and Demolition Waste Towards the Development of Sustainable Cement-Free Pervious Concrete: the Proof of Concept

Low-Energy Consumption Preparation of Fine Waterproof Cementitious Material with High-Volume Phosphogypsum

Development of a novel eco-efficient LC2 conceptual cement based ultra-high performance concrete (UHPC) incorporating limestone powder and calcined clay tailings: Design and performances

Mechanics, hydration phase and pore development of embodied energy and carbon composites based on ultrahigh-volume low-carbon cement with limestone calcined clay

A new eco-friendly concrete made of high content phosphogypsum based aggregates and binder: Mechanical properties and environmental benefits

Study on application and environmental effect of phosphogypsum-fly ash-red mud composite cemented paste backfill

Study on the Performance Optimization of Plant-Growing Ecological Concrete

Performance optimization and characterization of loess-slag-based geopolymer composite: A new sustainable green material for backfill

Recycling phosphogypsum as a sole calcium oxide source in calcium sulfoaluminate cement and its environmental effects

Preparation of solid-waste-based pervious concrete for pavement: A two-stage utilization approach of coal gangue

Ultra-low carbon lightweight engineered cementitious composite: Design and material characterization

Hydration process and fluoride solidification mechanism of multi-source solid waste-based phosphogypsum cemented paste backfill under CaO modification

A new civil engineering material: normal temperature modified phosphogypsum embedded filler

Preparation of phosphogypsum-based cemented paste backfill and its environmental impact based on multi-source industrial solid waste

Greener phosphogypsum-based all-solid-waste cementitious binder with steel slag activation: Hydration, mechanical properties and durability