Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

Strain Engineering Toward High‐Performance Formamidinium‐Based Perovskite Solar Cells

Strain release of formamidinium-cesium perovskite with imprint-assisted organic ammonium halide compensation for efficient and stable solar cells

Strain Effects on Flexible Perovskite Solar Cells

Strain in perovskite solar cells: origins, impacts and regulation

Inhibited Crack Development by Compressive Strain in Perovskite Solar Cells with Improved Mechanical Stability

Molecular Hinges Stabilize Formamidinium‐Based Perovskite Solar Cells with Compressive Strain

Strain Regulation and Defect Passivation of FA‐Based Perovskite Materials for Highly Efficient Solar Cells

Strain engineering in perovskite

Strain Engineering of Metal–Halide Perovskites toward Efficient Photovoltaics: Advances and Perspectives

Strain Engineering in Perovskite Solar Cells and Its Impacts on Carrier Dynamics

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Strain relaxation and phase regulation in quasi-2D perovskites for efficient solar cells

Metastable interphase induced pre-strain compensation enables efficient and stable perovskite solar cells

Strain Release and Defect Passivation in Formamidinium-Dominated Perovskite via a Novel in-Plane Thermal Gradient Assisted Crystallization Strategy

Stable Formamidinium‐Based Perovskite Solar Cells Via in Situ Grain Encapsulation

Strain analysis and engineering in halide perovskite photovoltaics

Facile lattice tensile strain compensation in mixed-cation halide perovskite solar cells

Strain Regulation via Pseudo Halide‐Based Ionic Liquid toward Efficient and Stable α‐FAPbI3 Inverted Perovskite Solar Cells

Multifunctional Crosslinking‐Enabled Strain‐Regulating Crystallization for Stable, Efficient α‐FAPbI 3 ‐Based Perovskite Solar Cells

Regulating Compressive Strain Enables High‐Performance Tin‐Based Perovskite Solar Cells

FAPbI 3 Perovskite Solar Cells: From Film Morphology Regulation to Device Optimization