Abstract:Comprehensive Summary Recently, hybrid organic–inorganic perovskite materials have drawn widespread attention because of their outstanding optoelectrical properties (i.e., high absorption coefficient, long carrier diffusion distance), hence they are suitable light‐absorbing materials for photovoltaic application. Among all perovskite materials, formamidinium lead iodide (FAPbI3) based solar cells exhibit impressive power conversion efficiency (PCE) at laboratory stage, showing great potential to compete with silicon‐based solar cell. However, FAPbI3 still suffers from poor phase stability which is the prior problem that needs to be addressed before its further commercialization. To be precise, the photoactive phase (α phase) is thermodynamically metastable at room temperature, which not only makes α phase tend to transform into photoinactive phase (δ phase), but also causes competitive crystallization between two phases during the film preparation process, making it hard to fabricate pure α‐FAPbI3 films. In our review, we summarized key factors that are vital for obtaining high‐quality FAPbI3 perovskite thin films and enhancing the stability of FAPbI3 photoactive phase. First of all, precursor solution stability is of great importance since the conditions of precursor solution determine the nucleation and crystal growth process of perovskite. By introducing coordinating additives, using FAPbI3 single crystal as raw material or applying co‐solution strategy, the impurities formed by side reaction during precursor solution aging can be effectively suppressed, thus the stability of FAPbI3 solution can be greatly prolonged. Second, the crystallization kinetics of FAPbI3 have been systematically manipulated to obtain dense and large grain size perovskite films. Through introducing intermediate phase, regulating the surface energy, and retarding the crystal growth of FAPbI3 in crystallization process, not only films without pinholes and fewer grain boundaries can be obtained, the pre‐formed δ phase at room temperature can also be well‐suppressed, thus high‐quality α‐FAPbI3 films can be obtained. Third, how to thermodynamically enhance the phase stability of acquired FAPbI3 film has been extensively studied. The Gibbs free energy of FAPbI3 photoactive phase can be reduced through composition engineering, dimension engineering and external additives engineering, hence the phase transition barrier from α phase to δ phase has been significantly improved, which further enhance the phase stability of α‐ FAPbI3. Lastly, we pointed out challenges of each method and proposed potential applications of mentioned strategies on improving the stability of all kinds of perovskite materials, thus further boost the commercialization of perovskite solar cell devices. This article is protected by copyright. All rights reserved.

FAPbI 3 Perovskite Solar Cells: From Film Morphology Regulation to Device Optimization

Inorganic perovskite solar cells: an emerging member of the photovoltaic community

Efficient Additive-Free FAPbI3 Perovskite Solar Cells Achieved by Promoting Homogeneity

High Performance Inverted RbCsFAPbI3 Perovskite Solar Cells Based on Interface Engineering and Defects Passivation.

Recent Advances in Improving Phase Stability of Perovskite Solar Cells

Advances to Stabilize Photoactive Phase of FAPbI3 Perovskite

Tailoring the Interface in FAPbI3 Planar Perovskite Solar Cells by Imidazole‐Graphene‐Quantum‐Dots

Stable α‐FAPbI3 via porous PbI2 for efficient perovskite solar cells

Tailoring the Interface in FAPbI 3 Planar Perovskite Solar Cells by Imidazole‐Graphene‐Quantum‐Dots

Synergetic Co‐Modulation of Crystallization and Co‐Passivation of Defects for FAPbI 3 Perovskite Solar Cells

A Self-Assembled 3D/0D Quasi-Core-Shell Structure As Internal Encapsulation Layer for Stable and Efficient FAPbI3 Perovskite Solar Cells and Modules

Optimization of Α-Fapbi3 Crystallization by Intermediate Compounds Transformation for Efficient and Stable Perovskite Solar Cells

A Self‐Assembled 3D/0D Quasi‐Core–Shell Structure as Internal Encapsulation Layer for Stable and Efficient FAPbI 3 Perovskite Solar Cells and Modules

Advances in Crystallization Regulation and Defect Suppression Strategies for All-inorganic CsPbX3 Perovskite Solar Cells

Regulating the Crystallization of FAPbI3‐Based Perovskite with a Furan Substituted Ethylammonium Additive for Achieving Highly Efficient Solar Cells

Crystal Growth Regulation of α‐FAPbI3 Perovskite Films for High‐Efficiency Solar Cells with Long‐Term Stability

Strain Regulation via Pseudo Halide‐Based Ionic Liquid toward Efficient and Stable α‐FAPbI3 Inverted Perovskite Solar Cells

ZnO/SnO2 bilayer electron transport layer strategy to improve the performance of FAPbI3 solar cell

Tailoring the Interface with a Multifunctional Ligand for Highly Efficient and Stable FAPbI3 Perovskite Solar Cells and Modules

Towards highly stable and efficient planar perovskite solar cells: Materials development, defect control and interfacial engineering

Complex Additive‐Assisted Crystal Growth and Phase Stabilization of α‐FAPbI3 Film for Highly Efficient, Air‐Stable Perovskite Photovoltaics