Abstract:The sole micropores strictly restrict the wide utilization of TS-1 zeolite in the catalytic fields, especially in the catalytic conversion of compounds with large molecular sizes. Here, we report a feasible and economical method to overcome this drawback. In this work, the hierarchical TS-1 zeolite was constructed via post-acid treatment, post-alkali etching, and a combination of post-acid treatment and alkali etching methods, after which, the corresponding NiMo-supported catalysts were prepared via the incipient wetness impregnation method. Then, the aforementioned materials were fully characterized using X-ray diffraction (XRD), N-2 adsorption-desorption, pyridine adsorbed Fourier transform infrared spectroscopy (Py - FTIR), H-2 temperature programmed reduction (H-2 - TPR), X-ray photoelectron spectroscopy (XPS), and high-resolution transition electron microscope (HR-TEM) to unravel the changes in the physicochemical properties caused by the post treatments. Finally, the hydrodesulfurization of dibenzothiophene (DBT) was used as a probe to assess the effects of the post-treatments on the catalytic performance of the hierarchical NiMo/TS-1 catalysts. The results showed that the MFI topology of TS-1 zeolite remained undamaged significantly and the serial hierarchical TS-1 zeolites exhibited higher specific surface areas and mesopore structures. Moreover, appropriate amounts of Bronsted acid sites were formed at the surface of the serial hierarchical TS-1 zeolites. The interaction between the active metals and the support materials was also modulated by the post-treatment of TS-1 zeolite, which resulted in better dispersion of Ni promoted MoS2 slabs with a higher proportion of NiMoS active phase, further leading to the enhanced catalytic activity and direct desulfurization pathway selectivity of the corresponding serial hierarchical NiMo/TS-1 catalysts. Among all the prepared catalysts, the catalytic activity was enhanced by approximately 1.2 times over catalyst NiMo/AT-TS-1 obtained by post-acid treatment compared to that over catalyst NiMo/TS-1 without treatment and on which the selectivity of the DDS pathway was 22% higher compared to that over catalyst NiMo/TS-1.

Pt–Mo/MWCNT catalysts for desulfurization of extra-heavy crude oil at low temperature

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Role of the Solvent Evaporating Temperature on the NiMo/TiO2-Al2O3 Catalyst and the Hydrodesulfurization Performance for 4,6-Dimenthyldibenzothiophehe

Oxidative desulfurization of model compounds and crude oil using Mo/Ti-DMSN catalyst and a detailed molecular characterization of sulfur species

Molybdenum anchored on NH2-modified spherical SiO2: A highly efficient and stable catalyst for oxidative desulfurization of fuel oil: Oxidative desulfurization using Mo-NH2-SiO2

Study on the in situ desulfurization and viscosity reduction of heavy oil over MoO3–ZrO2/HZSM-5 catalyst

Molybdenum Anchored On Nh2-Modified Spherical Sio2: A Highly Efficient And Stable Catalyst For Oxidative Desulfurization Of Fuel Oil

Surfactant-Free Synthesis of Ultrafine Pt Nanoparticles on MoS 2 Nanosheets as Bifunctional Catalysts for the Hydrodeoxygenation of Bio-Oil

Enhanced Catalytic Hydrogenation of Olefins in Sulfur-Rich Naphtha Using Molybdenum Carbide Supported on γ-Al2O3 Spheres under Steam Conditions: Simulating the Hot Separator Stream Process

Nanostructured Molybdenum Carbides Supported on Carbon Nanotubes As Efficient Catalysts for One-Step Hydrodeoxygenation and Isomerization of Vegetable Oils

Titanium dioxide modified nanosized TS-1 zeolite supported phosphotungstic acid as a catalyst for deep catalytic oxidative desulfurization of fuel oil

Preparation of MoO3/g-C3N4 catalyst and its application in the oxidation desulfurization of model oil

Preparation of MoO 2 /g-C 3 N 4 Composites with a high surface area and its Application in Deep Desulfurization from Model Oil

Enhanced hydrophobic microporous Pt/silica with high adsorption and catalytic oxidation for trace toluene removal

Study on hydrodesulfurization of catalytic cracking gasoline on Mo-Co catalyst

Ultrasonically Treated Multi-Walled Carbon Nanotubes (mwcnts) As PtRu Catalyst Supports for Methanol Electrooxidation

Study on Selective Hydrodesulfurization Catalysts for Fluid Catalytic Cracking Gasoline Using In-Situ Infrared

Synthesis and Characterization of NiMoS/TiMg and NiWS/TiMg Nanocatalysts and Their Application in the Hydrodesulfurization of Dibenzothiophene

Mesoporous Carbon Supported Co-Mo and Ni-Mo Catalysts for Hydrodesulfurization

C-S cleavage of dibenzothiophenes with or without steric hindrance by the interface between PtS x and ZnO

Synthesis of loaded monolayer MoS 2 catalysts and effect on coal tar hydrotreating performance