Next Generation Batteries: Aim for the Future
Shulei Chou,Yan Yu
DOI: https://doi.org/10.1002/aenm.201703223
IF: 27.8
2017-01-01
Advanced Energy Materials
Abstract:DOI: 10.1002/aenm.201703223 low-cost and water-soluble binders which were observed with enhanced chemical/physical interactions with the electrode materials and stronger mechanical adhesion for better durability for large volume variation. A significant improvement of electrochemical performance has been reported for Si-based anodes, spinel/layered oxide cathodes and sulfur cathodes. It is also noted that the electrochemical performances for most of the water soluble binders reported in the literature were investigated in lab scales at mild conditions in half-cell testing systems. Long term stability testing in a real full battery system under extreme conditions is yet to be done. This will bring the collaborative work from both academic and industry. Li-sulfur batteries, which can provide high specific energy for next generation batteries beyond portable electronic devices with low-cost feature, have become a hot topic in research. Zhang’s group highlight the recent advance in high-sulfurloading Li-S batteries enabled by hierarchical design principles at multiscale including developing novel host materials for sulfur, using advanced binders, designing rational electrode architectures, optimizing high-efficiency and high current anodes, applying multifunctional separators, and inventing novel cell configurations. Although great progress has been achieved in the laboratory, the performance of Li-S pouch cells is still below the great expectation from the market. Tremendous challenges such as safety issue with the involvement of lithium metal need to be solved before Li-S could be the next commercial success after Li-ion batteries. Organic electrode materials could be the promising active materials for next generation green and sustainable lithium/ sodium ion batteries owing to their low cost, environmental benignity, renewability, redox stability and structural diversity. Quinone based organic materials are considered to be the most promising electrode materials for both Li/Na ion batteries because of their high theoretical capacity, good reaction reversibility and high resource availability. The challenges include the solubility in the electrolyte leading to short cycle life, poor electric conductivity leading to poor rate capability, low working potential (<3.0 V) leading to low specific energy, low density leading to low volumetric energy density. Wu summarizes the recent progress on Quinone based organic active materials for both lithium and sodium ion batteries. Introducing a functional group and a conductive/protection coating could effectively prevent the dissolution of active materials, increase the discharge plateaus and enhance the electron transfer. The future looks bright for Quinone based active materials for Li/Na-ion batteries. Li-O2 battery research is also one of the focuses in this special issue as Li-O2 batteries theoretically offer the highest specific energy among all the electrochemical energy storage systems. So far, many research efforts have been made to address the challenges including low round trip efficiency, low specific capacity, and poor cycling stability. Luo highlights the recent progress associated with novel air electrode optimization and Next generation electrochemical energy storage devices are of great interest for applications in both research and industry. Here, under the help of Dr. Carolina Novo da Silva, we proposed this special issue designed to complete the special issue in Advanced Materials for the Next Generation Battery Symposium which was held in 2016 at the University of Wollongong. This issue contains different length reviews to highlight research hot spots in next generation batteries, including high energy Si anode for Li-ion batteries, carbon based anode and cathode materials for sodium-ion batteries, Li-Sulphur batteries, Na-Sulphur batteries, Li-Air batteries, and Potassium-ion batteries. Silicon is the most promising next generation anode material for Li-ion batteries owing to its highest known theoretical capacity and abundance on earth. The current commercial anode has only a limited amount (≈5%) of Si in the anode side. However, the challenge is still there for a high Si loading anode including low initial coulombic efficiency and a low cycle life due to the large volume changes, unstable solid electrolyte interphase (SEI) layer, and poor electric and ionic conductivity. Luo summarizes the current progress for using surface and interface engineering strategies to solve these issues. Many types of functional shells, such as silicon oxide, metal, metal oxide, carbon, and polymer were used to create the core-shell, yolk-shell and/or sandwiched structures to boost the lithium storage performance. The future work on understanding the fundamental Si electrode and materials chemistry should more focus on real batteries and not coin cells or half cells. The review also points out that the high production cost of nanostructured silicon is also a major obstacle for the commercialization of silicon anode. More work should be focused on developing a commercially available low-cost synthesis method for a high performance nanostructured silicon anode with environmentally friendly route as well. Binder only takes a small partial of weight (<5%) comparing to anode or cathode materials in a real commercial battery, but it plays a critical role in maintaining the integrity of the electrode to achieve a good cycle life. Sun’s group summarizes the recent progresses on the development of novel eco-friendly,