Abstract:The booming market of portable and wearable electronics has aroused the requests for advanced flexible self-powered energy systems featuring both excellent performance and high safety. Herein, we report a safe, flexible, self-powered wristband system by integrating high-performance zinc-ion batteries (ZIBs) with perovskite solar cells (PSCs). ZIBs were first fabricated on the basis of a defective MnO2–x nanosheet-grown carbon cloth (MnO2–x@CC), which was obtained via the simple lithium treatment of the MnO2 nanosheets to slightly expand the interlayer spacing and generate rich oxygen vacancies. When used as a ZIB cathode, the MnO2–x@CC with a ultrahigh mass loading (up to 25.5 mg cm–2) exhibits a much enhanced specific capacity (3.63 mAh cm–2 at current density of 3.93 mA cm–2), rate performance, and long cycle stability (no obvious degradation after 5000 cycles) than those of the MnO2@CC. Importantly, the MnO2–x@CC-based quasi-solid-state ZIB not only achieves excellent flexibility and an ultrahigh energy density of 5.11 mWh cm–2 (59.42 mWh cm–3) but also presents a high safety under a wide temperature range and various severe conditions. More importantly, the flexible ZIBs can be integrated with flexible PSCs to construct a safe, self-powered wristband, which is able to harvest light energy and power a commercial smart bracelet. This work sheds light on the development of high-performance ZIB cathodes and thus offers a good strategy to construct wearable self-powered energy systems for wearable electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.1c03341?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.1c03341</a>.Figures of SEM images, XRD patterns, XPS spectra, GCD curves, cycling stability, EPR spectra, CV curves, log(i) vs log(v) plots, GITT profiles, specific capacity, images of the smart bracelet on a subject's wrist, and schematic illustrations of exercise information (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_001.pdf">PDF</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under puncturing (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_002.mp4">MP4</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under cutting (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_003.mp4">MP4</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under cropping (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_004.mp4">MP4</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under hammering (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_005.mp4">MP4</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under soaking (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_006.mp4">MP4</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under combustion (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_007.mp4">MP4</a>)This article has not yet been cited by other publications.

3D Hierarchical Sunflower‐Shaped MoS2/SnO2 Photocathodes for Photo‐Rechargeable Zinc Ion Batteries

Carbon superstructure‐supported half‐metallic V2O3 nanospheres for high‐efficiency photorechargeable zinc ion batteries

Molybdenum Disulfide-Zinc Oxide Photocathodes for Photo-Rechargeable Zinc-Ion Batteries

Multiplying Light Harvest Driven by Hybrid-Reflections 3D Electrodes Achieves High-Availability Photo-Charging Zinc-Ion Batteries

A Photo‐Assisted Zinc–Air Battery with MoS2/Oxygen Vacancies Rich TiO2 Heterojunction Photocathode

A Safe Flexible Self-Powered Wristband System by Integrating Defective MnO 2– x Nanosheet-Based Zinc-Ion Batteries with Perovskite Solar Cells

An Efficient MnO2 Photocathode with an Excellent SnO2 Electron Transport Layer for Photo-Accelerated Zinc Ion Batteries

Achieving Ultrafast Charge Transfer by Engineering Multiple Pn Junctions in 3D Hierarchical Cathodes Toward Photo‐Chargeable Zinc‐Organic Batteries

MoS2 nanosheets with expanded interlayer spacing for rechargeable aqueous Zn-ion batteries

Photo‐assisted Chemical Self‐rechargeable Zinc Ion Batteries with High Charging and Discharging Efficiency

Three-dimensional Ordered Macroporous Flexible Electrode Design Toward High-Performance Zinc-Ion Batteries.

The Design Of Flower-Like C-Mno2 Nanosheets On Carbon Cloth Toward High-Performance Flexible Zinc-Ion Batteries Dagger

An Air-Rechargeable Zn Battery Enabled by Organic-Inorganic Hybrid Cathode

A Highly integrated flexible photo-rechargeable system based on stable ultrahigh-rate quasi-solid-state zinc-ion micro-batteries and perovskite solar cells

Dual photoelectrodes activate oxygen evolution and oxygen reduction reactions enabling a high-performance Zn-air battery and an efficient solar energy storage

High-Performance Quasi-Solid-State Flexible Aqueous Rechargeable Ag–Zn Battery Based on Metal–Organic Framework-Derived Ag Nanowires

Dendrite-free Zinc Deposition Enabled by MXene/nylon Scaffold and Polydopamine Solid-Electrolyte Interphase for Flexible Zinc-Ion Batteries

High energy density flexible zinc–ion batteries enabled by polyaniline-encapsulated molybdenum-doped tungsten oxide nanorods as a zinc intercalation electrode

In-situ formation of ultrafine ZnMn2O4-MnOOH composite nanoparticles embedded into porous carbon nanospheres for stable aqueous zinc-ion batteries

The Formation of Three-Dimensional Phosphorus-Doped MoO2/C Nanostructures for High-Performance Aqueous Zinc-Ion Batteries

Flexible rechargeable photo-assisted zinc-air batteries based on photo-active pTTh bifunctional oxygen electrocatalyst