Abstract:The booming market of portable and wearable electronics has aroused the requests for advanced flexible self-powered energy systems featuring both excellent performance and high safety. Herein, we report a safe, flexible, self-powered wristband system by integrating high-performance zinc-ion batteries (ZIBs) with perovskite solar cells (PSCs). ZIBs were first fabricated on the basis of a defective MnO2–x nanosheet-grown carbon cloth (MnO2–x@CC), which was obtained via the simple lithium treatment of the MnO2 nanosheets to slightly expand the interlayer spacing and generate rich oxygen vacancies. When used as a ZIB cathode, the MnO2–x@CC with a ultrahigh mass loading (up to 25.5 mg cm–2) exhibits a much enhanced specific capacity (3.63 mAh cm–2 at current density of 3.93 mA cm–2), rate performance, and long cycle stability (no obvious degradation after 5000 cycles) than those of the MnO2@CC. Importantly, the MnO2–x@CC-based quasi-solid-state ZIB not only achieves excellent flexibility and an ultrahigh energy density of 5.11 mWh cm–2 (59.42 mWh cm–3) but also presents a high safety under a wide temperature range and various severe conditions. More importantly, the flexible ZIBs can be integrated with flexible PSCs to construct a safe, self-powered wristband, which is able to harvest light energy and power a commercial smart bracelet. This work sheds light on the development of high-performance ZIB cathodes and thus offers a good strategy to construct wearable self-powered energy systems for wearable electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.1c03341?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.1c03341</a>.Figures of SEM images, XRD patterns, XPS spectra, GCD curves, cycling stability, EPR spectra, CV curves, log(i) vs log(v) plots, GITT profiles, specific capacity, images of the smart bracelet on a subject's wrist, and schematic illustrations of exercise information (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_001.pdf">PDF</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under puncturing (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_002.mp4">MP4</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under cutting (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_003.mp4">MP4</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under cropping (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_004.mp4">MP4</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under hammering (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_005.mp4">MP4</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under soaking (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_006.mp4">MP4</a>)Movie showing that the QSS H-MnO2–x@CC// battery can safely power an electronic thermometer and hygrometer under combustion (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03341/suppl_file/nn1c03341_si_007.mp4">MP4</a>)This article has not yet been cited by other publications.

A Highly integrated flexible photo-rechargeable system based on stable ultrahigh-rate quasi-solid-state zinc-ion micro-batteries and perovskite solar cells

Highly Integrated Perovskite Solar Cells‐Based Photorechargeable System with Excellent Photoelectric Conversion and Energy Storage Ability

An Efficient Ultra‐Flexible Photo‐Charging System Integrating Organic Photovoltaics and Supercapacitors

3D Hierarchical Sunflower‐Shaped MoS2/SnO2 Photocathodes for Photo‐Rechargeable Zinc Ion Batteries

Multitasking MXene Inks Enable High‐Performance Printable Microelectrochemical Energy Storage Devices for All‐Flexible Self‐Powered Integrated Systems

Integration of a Paper‐Based Supercapacitor and Flexible Perovskite Mini‐Module: Toward Self‐Powered Portable and Wearable Electronics

High-performance Flexible All-Solid-state Aqueous Rechargeable Zn–MnO2 Microbatteries Integrated with Wearable Pressure Sensors

High-Performance transparent and flexible Zinc-Ion Solid-State batteries based on nanotube network and hydrogel electrolyte

Self-charging integrated energy modules: A record photoelectric storage efficiency of 14.6 %

A Flexible and Safe Planar Zinc‐Ion Micro‐Battery with Ultrahigh Energy Density Enabled by Interfacial Engineering for Wearable Sensing Systems

Energy Harvesting and Storage with a High Voltage Organic Inorganic Photo‐Battery for Internet of Things Applications

Cathode‐Free Aqueous Micro‐battery for an All‐in‐One Wearable System with Ultralong Stability

A Safe Flexible Self-Powered Wristband System by Integrating Defective MnO 2– x Nanosheet-Based Zinc-Ion Batteries with Perovskite Solar Cells

An ultraflexible energy harvesting-storage system for wearable applications

Printable magnesium ion quasi-solid-state asymmetric supercapacitors for flexible solar-charging integrated units

Scalable Fabrication of Printed Zn//MnO 2 Planar Micro-Batteries with High Volumetric Energy Density and Exceptional Safety

A Portable and Efficient Solar‐Rechargeable Battery with Ultrafast Photo‐Charge/Discharge Rate

A highly efficient perovskite photovoltaic-aqueous Li/Na-ion battery system

Scalable fabrication of printed Zn//MnO2 planar micro-batteries with high volumetric energy density and exceptional safety

Printable Fabrication of a Fully Integrated and Self-Powered Sensor System on Plastic Substrates

High-Performance Quasi-Solid-State Flexible Aqueous Rechargeable Ag–Zn Battery Based on Metal–Organic Framework-Derived Ag Nanowires