Abstract:Wearable electronics are one of the most rapidly growing industries, due to their extended use in everyday applications resulting in an increased demand for portable energy storage devices. Despite immense success in commercialization of Lithium-ion batteries (LIBs), conventional LIBs suffer from issues of cost and safety. The expanding need for cheaper, and safer energy storage devices led explorations towards alternatives. After careful considerations, Zinc (Zn)-Manganese dioxide (MnO 2 ) based alkaline system was chosen to be investigated in this work due to its low cost, inherent safety, and high theoretical energy density. However, challenges associated with making the aforementioned system rechargeable and highly performing still remains. The work in this study is directed towards enhancing the overall performance of the Zn-MnO 2 alkaline battery in addition to making it suitable for flexible and wearable applications. A highly ionically conducting polymer electrolyte ({5}CP) with excellent physical and electrochemical stability primarily comprising biopolymer chitosan is prepared by using a time and energy-efficient technique. Incorporation of this polymer electrolyte with Zn anode and MnO 2 cathode enabled the successful preparation of a physically flexible cell. To obtain high cyclability and performance of the system; issues of inactive phase formations (Mn x O y , ZnMn x O y ), low active material availability, pronounced shape changes at the anode surface, and zincate ion transfer towards cathode were overcome by enhancing the electrochemically active layers in the system. The assembled cell comprising the enhanced fabricated layers; (i.e. a Zinc/Stainless steel mesh composite anode, a hierarchical binder-free bismuth and copper additives based MnO 2 cathode, and a chitosan-based polymer electrolyte with calcium hydroxide additive) indicated excellent rate capabilities (486 mAh/g @ 0.1 A/g, 78% of the theoretical 2-electron capacity on MnO 2 ), long cycling stabilities (70% retention over 1000 cycles), and good energy densities (155 – 400 Wh/kg @ 0.1 – 1 A/g). Moreover, a number of destructive tests such as being bent, hammered, pressurized, and punctured were conducted on the pouch cell fabricated using the above-mentioned layers to analyze the cells' safety, reliability, and robustness. Results indicated not much deterioration in capacities. Additionally, when the cell was bent and tested for long performance; a stable discharge capacity (270 mAh/g @ 1 A/g) was obtained after 250 cycles, thus attesting to excellent cycling stability. The successful working of the fabricated cell was validated by lighting up an LED. The successful findings presented in this study can chart new pathways to the development of safe, flexible, cost-effective, and more environmentally responsible alternative energy storage sources for wearables.

A Flexible and Safe Planar Zinc‐Ion Micro‐Battery with Ultrahigh Energy Density Enabled by Interfacial Engineering for Wearable Sensing Systems

An Ultrahigh Energy Density Quasi‐Solid‐State Zinc Ion Microbattery with Excellent Flexibility and Thermostability

Fabrications of High‐Performance Planar Zinc‐Ion Microbatteries by Engraved Soft Templates

3D printing of solid-state zinc-ion microbatteries with ultrahigh capacity and high reversibility for wearable integration design

Scalable Fabrication of Printed Zn//MnO 2 Planar Micro-Batteries with High Volumetric Energy Density and Exceptional Safety

Scalable fabrication of printed Zn//MnO2 planar micro-batteries with high volumetric energy density and exceptional safety

Vertical Graphene Film Enables High-Performance Quasi-Solid-State Planar Zinc-Ion Microbatteries

Flexible Zinc–Air Batteries with Ampere‐Hour Capacities and Wide‐Temperature Adaptabilities

Wearable and Fully Biocompatible All-in-One Structured ′′Paper-Like′′ Zinc Ion Battery

A Flexible Aqueous Zinc–Iodine Microbattery with Unprecedented Energy Density

Flexible quasi-3D zinc ion microcapacitor based on V2O5-PANI cathode and MXene anode

Flexible zinc-ion microbattery based on a VS2/MXene cathode with high cycle life

Cathode‐Free Aqueous Micro‐battery for an All‐in‐One Wearable System with Ultralong Stability

A flexible, heat-resistant and self-healable “rocking-chair” zinc ion microbattery based on MXene-TiS2 (de)intercalation anode

Engineering integrated structure for high-performance flexible zinc-ion batteries

3D printing flexible zinc-ion microbatteries with ultrahigh areal capacity and energy density for wearable electronics

Three-dimensional interconnected ultrathin manganese dioxide nanosheets grown on carbon cloth combined with Ti3C2Tx MXene for high-capacity zinc-ion batteries

A Highly Flexible and Lightweight MnO2/Graphene Membrane for Superior Zinc‐Ion Batteries

Binder-free flexible zinc-ion batteries: one-step potentiostatic electrodeposition strategy derived Ce doped-MnO2 cathode

A new In Situ Oxidized 2D Layered MnBi2Te4 Cathode for High-Performance Aqueous Zinc-Ion Battery.

(Invited) Flexible and Safe Zinc Alkaline Solid-State Rechargeable Battery for Wearable Applications