Optimal Design of Hemispherical 7-Hole Probe Tip With Perpendicular Holes

Tao Yao,Shu-Dao Zhou,Min Wang,Song Ye,Yang-Chun Zhang

DOI: https://doi.org/10.1109/access.2021.3087613

IF: 3.9

2021-01-01

IEEE Access

Abstract:The 7-hole probe measurement system is mainly used to measure three-dimensional flow fields. During the measurement, the probe head was in direct contact with the measured object, and the head structure had a significant influence on the accuracy of the flow field measurement. The main influencing factors were the hole opening mode, hole position, and hole diameter. For a hemispherical 7-hole probe with perpendicular and forward-facing holes, orthogonal experiments with three levels and three factors (inflow velocity, hole position, and hole diameter) were designed, and additional experiments were conducted on the significant factors. The importance of factors was evaluated based on the correlation between different structural parameters and the pressure coefficient. The experiment was simulated using FLUENT, and the numerical simulation results demonstrated that the square of deviance at the inlet velocity, hole diameter, and hole position was 0.0018, 0.0013, and 0.3611, respectively. The position of the hole has a significant influence on the measurement results, but the influence of the inflow velocity and hole diameter is negligible, and the pressure coefficient is the smallest when the hole is at 45°. For the hemispherical 7-hole probe with forward facing hole, the hole is the best at approximately 45°, and considering the convenience of processing, the diameter of the hole can be selected as the diameter of the 1/10 probe.

computer science, information systems,telecommunications,engineering, electrical & electronic