Abstract:Polyolefins (POs) are considered a promising candidate for photovoltaic cell encapsulation due to their high volume resistivity, low water-vapor permeability, and outstanding outdoor stability. However, POs without functionalization have a low rate of cross-linking, which significantly slows the solar cell encapsulation process. Herein, we describe the use of a polymer product-engineering approach in which reactive pendent vinyl groups are controllably incorporated in PO polymer chains to accelerate their cross-linking reactions. The POs having limited vinyl functionalities of 0.02-0.37 mol % were synthesized via the copolymerization of ethylene, 1-octene, and vinylnorbornene or 1,9-decadiene at different monomer concentrations. The vinyl groups in the POs readily react with curing agents, increasing cross-linking rates by 14-fold up to 179.7 Pa.s(-1), as measured by the enhancement of the storage modulus (G'). The maximum G' value representing the melt strength was also increased from 11.3 to 69.0 kPa due to the high curing degree in the POs. The use of a curing agent could be reduced by 50%, and no curing coagent was required in the PO curing process. The vinyl-functionalized POs had a light transmittance of 91%, a good volume resistivity of 7.05 X 10(16) Omega.m, a low water-vapor permeability of 2.31 x 10(-12) g.m.m(-2) s(-1).Pa-1, and an improved mechanical strength after curing. The damp-heat and UV aging had little effect on their light transmittance. Our approach of synthesizing functional POs with pendent vinyl groups thus promises the development of new high-performance polymer materials for photovoltaic cell encapsulation.

Octaphenyl-POSS nanoparticles dispersed thick polyvinyl alcohol/acrylamide photopolymer with low volumetric shrinkage and high diffraction efficiency

Vinyl-Functionalized Polyolefins for Fast Photovoltaic Cell Encapsulation

Spatial Resolution of Polyvinyl Alcohol/Acrylamide Based Photopolymer Holographic Recording Material

Design of Highly Photofunctional Porous Polymer Films with Controlled Thickness and Prominent Microporosity

Exploration for Decreasing the Volume Shrinkage for Photopolymerization

Rapid Solid-State Photopolymerization of Octadecyl Acrylate: Low Shrinkage and Insensitivity to Oxygen

Optimization of Acrylamide-based Photopolymer and Its Holographic Character Investigation

Holographic Grating Formation in Dry Photopolymer Film with Shrinkage

A novel photopolymer material for holographic data storage

Solid Photopolymerization and Polymer Properties of Octadecyl Vinyl Ether

Study of effective optical thickness in photopolymer for application.

Study on Holographic Properties of a Water - Resistant Acrylamide - Based Photopolymer

Epoxy Resin-Photopolymer Composite with None-Shrinkage for Volume Holography

The Optical Polarization Properties of Phenanthrenequinone-Doped Poly(methyl Methacrylate) Photopolymer Materials for Volume Holographic Storage

High-Performance Holographic Photopolymers Based on Low Refractive Index Host Matrices Containing Fluoroelastomers

Characteristics Optimization of Organic Photopolymer Materials for Holographic Data Storage

Spatial Resolution Enhancement of a Red-Sensitive Acrylamide Based Photopolymer and Its Holographic Applications

Effect of Incorporation of Different Modified Al2o3 Nanoparticles on Holographic Characteristics of Pva/Aa Photopolymer Composites

Gold Nanosphere Doped Photopolymer for Volume Holography

Improvement of Ultrafast Holographic Performance in Silver Nanoprisms Dispersed Photopolymer.

Optimization of a Monomers-Based Photopolymer Used for Holographic Recording