Abstract:High entropy alloy nitride coatings (HEAN), showing superior mechanical strength, high oxidation resistance, and thermal stability, have often been used in protective hard coatings field. However, the high temperature tribological field of novel HEA nitride films has not yet been well studied. The correlations among tribological properties, compressive residual stress, mechanical properties, and self-lubricating oxide are still limited.In this research, the novel (AlCrNbSiTiMo)N coatings were fabricated on both Inconel-718 and Si (100) substrate by radio frequency (RF) magnetron sputtering via tuning both substrate bias at 300 °C deposition temperature. The (AlCrNbSiTiMo)N coatings with a specific substrate bias exhibit an outstanding hardness of 34.5±0.8 GPa.In the wear test at 700 °C, the films deposited at −100 V revealed the lowest wear rate around 1.2 × 10−6 mm3N−1 m−1. With Molybdenum doping, the MoO3 Magnéli phase was observed on the surface at elevated temperature wearing process, and the friction coefficient at high temperature decreased significantly due to a lubricating surface. The coating exhibited the average friction coefficient value of 0.48 in the wear test of 700 °C. The high temperature tribological performance was addressed and related to the mechanical properties, the plastic deformation resistance H3/E2, and the excess residual stress of the films.This study provides a new design for hard coatings applied to severe wearing conditions. By tuning substrate bias, the (AlCrNbSiTiMo)N coatings exhibit outstanding mechanical and tribological characteristics, which will be a promising candidate for high temperature tribological protective film.

Novel production techniques for solid solution Nb–Y–N films with improved tribological properties and hydrophobic behavior

Simultaneous enhancement of hardness, lubrication and corrosion resistance of solid solution Zr-Y-N film

Microstructure, mechanical and tribological properties of NbMoWTaAg refractory high entropy films with nano-layered self-organization

Electrochemical and tribological properties of different NbMoSiN composite- and gradient- films in simulated body fluids

Microstructure, Mechanical and Tribological Properties of Arc Ion Plating NbN-Based Nanocomposite Films

Tuning microstructure and mechanical and wear resistance of ZrNbTiMo refractory high-entropy alloy films via sputtering power

Design and Characterization of Self Lubricating Refractory High Entropy Alloy Based Multilayered Films

Effects of Yttrium Doping on High-Temperature Oxidation, Friction, and Wear Properties of CrAlN Films

Structural, Mechanical and Tribological Properties of Mo–S–N Solid Lubricant Films

High-temperature Tribological Properties of the Novel NiCr(MoNb)x-Ag Self-Lubricating Composite Films

Microstructures, Mechanical Properties and Tribological Behaviors of NiAl-based Composite Coatings with Various Addition of Nb

Study of morphological, physical and mechanical properties of thin NbN films synthesized via DC magnetron sputtering system

Improving the Lubrication of WSNb Nanocomposite Coatings by the In-Situ Oxygen Shielding Effect at Elevated Temperatures: A Combined Study with Density Functional Theory Simulations

Improvement of high entropy alloy nitride coatings (AlCrNbSiTiMo)N on mechanical and high temperature tribological properties by tuning substrate bias

Superlow friction and wear enabled by nanodiamond and hexagonal boron nitride on a-C:H films surfaces in dry nitrogen

Improved Mechanical and Tribological Properties of TaMoN-MoSx Sputtered Film by Addition of MoS2 Lubricants

Mechanical behavior, tribological properties, and thermal stability of (AlCrNbSiTiVZr)N high entropy alloy nitride coatings and their application to Inconel 718 milling

Preparation and Tribological Properties of Nb 1-x Ti x Se 2 Micro/Nanoparticles

Ultrasonic-assisted top-down preparation of NbSe2 micro/nanoparticles and hybrid material as solid lubricant for sliding electrical contact

Improving wear resistance of Zr-2.5Nb alloy by formation of microtextured nitride layer produced via laser surface texturing/plasma nitriding technology

Lubrication mechanisms of Nb-contained oxides characterizing tribochemistry of NiAl/Nb/Ag composites coatings revealed by the density functional theory (DFT) computation