Experimental study on the influence of surface modification methods of carbon fiber felt on the operation and heat transfer characteristics of loop heat pipes

Yixue Zhang,Junyu Liu,He Cheng,Tao Luan,Tongqing Yang,Hongyao Xue

DOI: https://doi.org/10.1016/j.applthermaleng.2023.121121

IF: 6.4

2023-07-12

Applied Thermal Engineering

Abstract:Under high heat flux, the heat leakage rate of the compensation chamber in a small loop heat pipe is large, which affects the operational stability and heat transfer efficiency of the loop heat pipe. It was proposed for the first time to locally modify the capillary wick thermal conductivity through surface modification, thereby reducing the heat leakage from the compensation chamber. By spraying a high thermal conductivity metal coating on the surface of a low thermal conductivity carbon fiber felt, the contradiction between the heat dissipation rate of the heat source and the heat leakage of the compensation chamber was solved. Static wicking height showed that the metal coating increased the suction force of the carbon fiber felt. Start-up and operation experiments showed that the modified wick significantly improved the start-up stability of the loop heat pipe and reduced the temperature of the heat dissipation surface. The loop heat pipe with a single-sided-coated wick showed the lowest heat dissipation surface temperature, thermal resistance, and heat leakage rate. The loop heat pipe with an aluminum single-sided-coated wick exhibited a heat source temperature of 82.81 °C, a thermal resistance of 0.26 K/W, and a heat transfer coefficient of 26.44 kW/(m 2 ·K) under a load of 150 W (37.5 W/cm 2 ). This study has significantly contributed to the future application of loop heat pipes in high heat flux electronic cooling.

energy & fuels,engineering, mechanical,thermodynamics,mechanics