Abstract:Abstract High-entropy oxides (HEOs) are widely researched as potential materials for thermal barrier coatings (TBCs). However, the relatively low thermal expansion coefficient (TEC) of those materials severely restricts their practical application. In order to improve the poor thermal expansion property and further reduce the thermal conductivity, high-entropy (La 0.2 Nd 0.2 Sm 0.2 Eu 0.2 Gd 0.2 ) 2 Ce 2 O 7 is designed and synthesized in this work. The as-prepared multicomponent material is formed in a simple disordered fluorite structure due to the high-entropy stabilization effect. Notably, it exhibits a much higher TEC of approximately 12.0 × 10 −6 K −1 compared with those of other high-entropy oxides reported in the field of TBCs. Besides, it presents prominent thermal insulation behavior with a low intrinsic thermal conductivity of 0.92 W·m −1 ·K −1 at 1400 °C, which can be explained by the existence of high concentration oxygen vacancies and highly disordered arrangement of multicomponent cations in the unique high-entropy configuration. Through high-temperature in-situ X-ray diffraction (XRD) measurement, this material shows excellent phase stability up to 1400 °C. Benefiting from the solid solution strengthening effect, it shows a higher hardness of 8.72 GPa than the corresponding single component compounds. The superior thermo-physical performance above enables (La 0.2 Nd 0.2 Sm 0.2 Eu 0.2 Gd 0.2 ) 2 Ce 2 O 7 a promising TBC material.

Crystal structure and thermophysical properties of (Gd0.25Sm0.25Yb0.25Y0.25)3TaO7 high-entropy oxide

(La0.2Dy0.2Nd0.2Sm0.2Eu0.2)2GdTaO7: a promising candidate oxides for high-temperature coating applications

Thermal Conductivity and Expansion Coefficient of (Sm0.5Gd0.3Yb0.2)2Ce2O7

Influence of Lu3+ addition on the structure, mechanical and thermophysical properties of Gd3TaO7 oxide

Phase compositions and thermophysical performances for (Sm1-xYbx)3TaO7 compounds

Thermophysical performances of Sm2O3-doped Gd3TaO7 oxides for thermal barrier coatings

Preparation, Characterization, And Thermophysical Properties Of (La0.95sr0.05)(2)Ce2o6.95 Ceramic For Thermal Barrier Coatings

Orthorhombic to tetragonal polymorphic transformation of YTa3O9 and its inhibition through the design of high-entropy (Y0.2La0.2Ce0.2Nd0.2Gd0.2)Ta3O9

Novel (Sm0.2Lu0.2Yb0.2Y0.2Dy0.2)3TaO7 high-entropy ceramic for thermal barrier coatings

Orthorhombic to tetragonal polymorphic transformation of YTa<sub>3</sub>O<sub>9</sub> and its inhibition through the design of high-entropy (Y<sub>0.2</sub>La<sub>0.2</sub>Ce<sub>0.2</sub>Nd<sub>0.2</sub>Gd<sub>0 .2</sub>) Ta<sub>3</sub>O<sub>9</sub>

Structural, thermophysical, mechanical and electrical properties of equimolar five-principal element fluorite-structured high-entropy oxides

High-entropy (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Ce2O7: A potential thermal barrier material with improved thermo-physical properties

Phase evolution and thermophysical properties of high‐entropy RE 2 (Y 0.2 Yb 0.2 Nb 0.2 Ta 0.2 Ce 0.2 ) 2 O 7 oxides

Tuning stoichiometry of high‐entropy oxides for tailorable thermal expansion coefficients and low thermal conductivity

High‐entropy ferroelastic rare‐earth tantalite ceramic: (Y 0.2 Ce 0.2 Sm 0.2 Gd 0.2 Dy 0.2 )TaO 4

Preparation and Thermophysical Properties of New Multi-Component Entropy-Stabilized Oxide Ceramics for Thermal Barrier Coatings

Rare-earth-tantalate high-entropy ceramics with sluggish grain growth and low thermal conductivity

Phase equilibria in the ZrO2-GdO1.5-TaO2.5 system at 1500 °C

First-principle calculations and experimental investigations of thermal barrier coating on (AlxY1-x)TaO4 ceramics

Preparation and High-Temperature Stability of (Zr1/5La1/5Sm1/5Dy1/5Gd1/5)O2−x High-Entropy Ceramic Materials

Synthesis and thermophysical performances of (Nd1-xYbx)2AlTaO7 oxides for heat-insulation coating applications