Abstract:Purpose Fused deposition modeling (FDM) nowadays offers promising future applications for fabricating not only thermoplastic-based polymers but also composite PLA/Metal alloy materials, this capability bridges the need for metallic components in complex manufacturing processes. The research is to explore the manufacturability of multi-metal parts by printing green bodies of PLA/multi-metal objects, carrying these objects to the debinding process and varying the sintering parameters. Design/methodology/approach Three different sample types of SS316L part, Inconel 718 part and bimetallic composite of SS316L/IN718 were effectively printed. After the debinding process, the printed parts (green bodies), were isothermally sintered in non-vacuum chamber to investigate the fusion behavior at four different temperatures in the range of 1270 °C−1530 °C for 12 h and slowly cooled in the furnace. All samples was assessed including geometrical assessment to measure the shrinkage, characterization (XRD) to identify the crystallinity of the compound and microstructural evolution (Optical microscopy and SEM) to explore the porosity and morphology on the surface. The hardness of each sample types was measured and compared. The sintering parameter was optimized according to the microstructural evaluation on the interface of SS316L/IN718 composite. Findings The investigation indicated that the de-binding of all the samples was effectively succeeded through less weight until 16% when the PLA of green bodies was successfully evaporated. The morphology result shows evidence of an effective sintering process to have the grain boundaries in all samples, while multi-metal parts clearly displayed the interface. Furthermore, the result of XRD shows the tendency of lower crystallinity in SS316L parts, whilst IN718 has a high crystallinity. The optimal sintering temperature for SS316L/IN718 parts is 1500 °C. The hardness test concludes that the higher sintering temperature gives a higher hardness result. Originality/value This study highlights the successful sintering of a bimetallic stainless steel 316 L/Inconel 718 composite, fabricated via dual-nozzle fused deposition modeling, in a non-vacuum environment at 1500 °C. The resulting material displayed maximum hardness values of 872 HV for SS316L and 755.5 HV for IN718, with both materials exhibiting excellent fusion without any cracks.

KARAKTERISASI FEEDSTOCK Fe2%Ni PADA PROSES METAL INJECTION MOLDING

Characterization of 17-4 PH stainless steel metal injection molding feedstock using mixing torque data

Experimental and Theoretical Investigation of Powder–Binder Mixing Mechanism for Metal Injection Molding

Investigating the Effect of Stearic Acid on the Mechanical, Rheological, and Microstructural Properties of AISI 4605 Feedstock for Metal Injection Molding Process

Rheological and Thermal Characterization of AISI 4605 Low-Alloy Steel Feedstock for Metal Injection Molding Process

Peningkatan Kuat bentur Produk 3D Printing Fused Deposition Modeling menggunakan Filamen Polypropylene

Effect of surface modification of metal powders (by aluminum stearate) on the properties of metal injection molding feedstock

Formulating titanium powder feedstocks for metal injection moulding from a clean binder system

Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks

Hybrid Mold: Comparative Study of Rapid and Hard Tooling for Injection Molding Application Using Metal Epoxy Composite (MEC)

The Study of Sintering Behavior of Stainless Steel 17-4PH-Stainless Steel 316L for Two Materials Powders Injection Molding (2C-PIM) Process

Manufacturing and Analysis of Overmolded Hybrid Fiber Polyamide 6 Composite

Pengaruh Parameter Proses 3D Printing Terhadap Kuat Bentur Menggunakan Fiamen Polycarbonate

Sintering parameter investigation for bimetallic stainless steel 316L/inconel 718 composite printed by dual-nozzle fused deposition modeling

A novel PEG/PMMA based binder composition for void-free metal injection moulding of Ti components

A Review of Metal Injection Moulding on WC-Co Cemented Carbide Comprised of Grain Growth Inhibitors (GGI)

Effect of Fe-Cr-B on the Microstructure and Mechanical Properties of a Powder Injection Molding Processed Fe-Cr-B/316L Stainless Steel Matrix Composite

Micro-Injection Molding of Carbon-Fiber-Reinforced Plastic (CFRP)/Polymethyl Methacrylate (PMMA) Composite Components

Effect of particle size on the properties of highly-filled polymers for fused filament fabrication

The Influence of Fused Deposition Modeling Parameters on the Properties of PA6/PA66 Composite Specimens by the Taguchi Method and Analysis of Variance

The Injected Foaming Study of Polypropylene/Multiwall Carbon Nanotube Composite with In Situ Fibrillation Reinforcement