Abstract:By adjusting the KOH/H2O texturing condition intendedly, different random pyramidal textures with the average pyramid size of 8 μm (large), 4 μm (medium) and 1.5 μm (small) were prepared on N type M2 monocrystalline silicon substrates for the fabrication of silicon heterojunction (SHJ) solar cell. It was evidenced that the pyramid morphology not only impacted the reflection of incident light and the heterojunction interface passivation quality but also affected the interface contact property between transparent conductive oxide (TCO) layer and Ag electrode. The texture with small pyramids presented the best anti-reflective and passivation performance due to the pyramidal size distribution uniformity, which brought the SHJ solar cell the highest short-circuit current density (JSC) and open-circuit voltage (VOC). However, the texture with small pyramids also led to the worst fill factor (FF). As a result, there was no obvious difference on the conversion efficiency for the textures with different pyramidal size. By characterizing the TCO/Ag contact, the FF reduction induced by the small pyramid texture could be attributed to the increased specific contact resistance of the TCO/Ag contact, which resulted from the fact that there were lots of voids between the TCO layer and Ag electrode, since Ag particles with a larger size than the small pyramids could not fill into the limited space between the adjacent pyramids. As a result, in order to realize the potential to enhance the SHJ solar cell conversion efficiency by adopting the texture with small pyramids, new Ag paste with smaller Ag particles should be adopted.

Prediction of sub-pyramid texturing as the next step towards high efficiency silicon heterojunction solar cells

Identification of embedded nanotwins at c-Si/a-Si:H interface limiting the performance of high-efficiency silicon heterojunction solar cells

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Pyramid size control and morphology treatment for high-efficiency silicon heterojunction solar cells

Silicon Homo-Heterojunction Solar Cells: A Promising Candidate to Realize High Performance More Stably

Silicon-nanocrystal-incorporated Ternary Hybrid Solar Cells

Realization of Quasi‐Omnidirectional Solar Cells with Superior Electrical Performance by All‐Solution‐Processed Si Nanopyramids

Simulation and experimental study of a novel bifacial structure of silicon heterojunction solar cell for high efficiency and low cost

Quasi‐Omnidirectional Ultrathin Silicon Solar Cells Realized by Industrially Compatible Processes

Improved Interfacial Contact for Pyramidal Texturing of Silicon Heterojunction Solar Cells

Realization of 13.6% Efficiency on 20 μm Thick Si/Organic Hybrid Heterojunction Solar Cells via Advanced Nanotexturing and Surface Recombination Suppression

Ultrafast Random‐Pyramid Texturing for Efficient Monocrystalline Silicon Solar Cells

Controllable Nanoscale Inverted Pyramids for Highly Efficient Quasi-Omnidirectional Crystalline Silicon Solar Cells.

Pyramid‐Textured Antireflective Silicon Surface In Graphene Oxide/Single‐Wall Carbon Nanotube–Silicon Heterojunction Solar Cells

Damp-Heat-Stable, High-Efficiency, Industrial-Size Silicon Heterojunction Solar Cells

High-Performance Ultrathin Organic-Inorganic Hybrid Silicon Solar Cells via Solution-Processed Interface Modification.

Simulation of a high-efficiency silicon-based heterojunction solar cell

Bifacial Si Heterojunction-Perovskite Organic-Inorganic Tandem to Produce Highly Efficient Solar Cell

Influence of the textured pyramid size on the performance of silicon heterojunction solar cell

Improved Interface Microstructure Between Crystalline Silicon and Nanocrystalline Silicon Oxide Window Layer of Silicon Heterojunction Solar Cells

Modification of Surface Morphology of A Textured Silicon Substrate and Its Application in Heterojunction Solar Cells