Abstract:Surface modification of hexagonal boron nitride and construction of 3D thermal conductivity network and preparation of epoxy resin matrix composites. This paper investigates the high thermal conductive properties of modified hexagonal boron nitride (h‐BN)/epoxy (EP) composites. Octadecyl trimethyl ammonium bromide as a cationic surfactant modified h‐BN and sodium carboxymethylcellulose to build 3D heat transfer framework by the ice template method and preparation of epoxy composites. The h‐BN was modified by inter‐ionic charge electrostatic attraction to improve the h‐BN dispersibility; characterization by scanning electron microscope, transmission electron microscope, zeta potential, x‐ray diffraction and Fourier transform infrared spectroscopy proved the success of h‐BN surficial modifyment. 3 wt% sodium carboxymethylcellulose was used to construct the optimal 3D modified h‐BN network, and the w‐BN/EP composites had a very high heat conduction; when the composite material acquired by the ice template method have high heat transfer coefficient, 1.57 W/(m K) for 25 wt% 3D modified h‐BN/EP heat transfer coefficient and 0.76 W/(m K) for modified h‐BN/EP at the same ratio, which is a 107% enhancement in heat transfer efficiency, and 0.12 W/(m K) for EP, which is a 1208% enhancement in thermal conductivity. The results of thermogravimetric analysis (thermogravimetric analysis and differential thermogravimetric analysis), differential scanning calorimetry, and infrared thermography indicate that the thermostability and rejection of heat of composite material was significantly improved. The variation of dielectric constant was stabilized to ensure lower dielectric loss. Overall, this study can better adapt to high‐frequency signal transmission. Highlights Use octadecyl trimethyl ammonium bromide to modify the interface of hexagonal boron nitride (h‐BN) enhances the dispersibility and reduces the inter‐facial heat resistance with epoxy resin through inter‐ionic electrostatic attraction. The optimal content of sodium carboxymethyl cellulose was selected to construct a 3D mesh framework with the modified h‐BN to ensure the formation of a continuous and homogeneous network at the maximum porosity. The 3D modified h‐BN network was prepared by the ice template method to reinforce the heat conductivity of the composite materials.

Preparation of 3D BN-BT/PVDF skeleton structure composites for high thermal conductivity and energy storage

Mille-Feuille Inspired Thermally Conductive Polymer Nanocomposites with Overlapping BN Nanosheets for Thermal Management Applications.

Synthesis of vertically aligned and interconnected BN fiber skeleton for significantly improving thermal conductivity of PVDF

Preparation of a 3D BN network structure by a salt‐template‐assisted method filled with epoxy resin to obtain high thermal conductivity nanocomposites

A binder-free ice template method for vertically aligned 3D boron nitride polymer composites towards thermal management

Achieving Significant Thermal Conductivity Enhancement via an Ice-Templated and Sintered BN-SiC Skeleton

Sandwich-structured polymers with electrospun boron nitrides layers as high-temperature energy storage dielectrics

Three-dimensional skeleton assembled by carbon nanotubes/boron nitride as filler in epoxy for thermal management materials with high thermal conductivity and electrical insulation

Construction of a Three-Dimensional BaTiO3 Network for Enhanced Permittivity and Energy Storage of PVDF Composites

Preparation and properties of three‐dimensional boron nitride submicron tube/epoxy resin composites with high thermal conductivity

Preparation of highly thermally conductive hBN‐PVA/PDMS composite using combined freeze‐drying and SCFNA method

Isotropically Ultrahigh Thermal Conductive Polymer Composites by Assembling Anisotropic Boron Nitride Nanosheets into a Biaxially Oriented Network.

Enhancing cryogenic thermal conductivity of epoxy composites through the incorporation of boron nitride nanosheets/nanodiamond aerogels prepared by directional‐freezing method

3D boron nitride foam filled epoxy composites with significantly enhanced thermal conductivity by a facial and scalable approach

Construction of 3D modified hexagonal boron nitride thermal conductivity network by ice template method and research of high heat‐conducting coefficient of epoxy resin matrix composite material

High Thermal Conductivity in Three-Dimensional BN/epoxy Composites by Engineered Favorable Interfacial Adhesion Between BN Sheets

Enhanced Thermal Conductivity and Mechanical Properties of BN@polymethylacrylimide/epoxy Composites with Self-Assembled Stable 3D Network

Construction of 3D interconnected boron nitride/carbon nanofiber hybrid network within polymer composite for thermal conductivity improvement

Poly(vinyl Alcohol)-Assisted Exfoliation and Grafting Modification of Boron Nitride Nanosheets with a High Aspect Ratio Via a Continuous Production Method for Energy Storage and Thermal Management.

Construction of three-dimensional network using boron nitride microspheres and the thermal conductivity/stability of epoxy resin composites

Construction of three-dimensional interconnected boron nitride/sliver networks within epoxy composites for enhanced thermal conductivity