Abstract:Abstract The behaviour of concrete in fire depends on its mix proportions and constituents and is determined by complex physicochemical transformations during heating. Normal‐strength concretes and high‐performance concretes microstructurally follow similar trends when heated, but ultra‐high‐performance concrete behaves differently. A key property unique to concrete amongst structural materials is transient creep. Any structural analysis of heated concrete that ignores transient creep will yield erroneous results, particularly for columns exposed to fire. Failure of structural concrete in fire varies according to the nature of the fire; the loading system and the type of structure. Failure could occur from loss of bending or tensile strength; loss of bond strength; loss of shear or torsional strength; loss of compressive strength; and spalling of the concrete. The structural element should, therefore, be designed to fulfil its separating and/or load‐bearing function without failure for the required period of time in a given fire scenario. Design for fire resistance aims to ensure overall dimensions of the section of an element sufficient to keep the heat transfer through this element within acceptable limits, and an average concrete cover to the reinforcement sufficient to keep the temperature of the reinforcement below critical values long enough for the required fire resistance period to be attained. The prediction of spalling – hitherto an imprecise empirical exercise – is now becoming possible with the development of thermohydromechanical nonlinear finite element models capable of predicting pore pressures. The risk of explosive spalling in fire increases with decrease in concrete permeability and could be eliminated by the appropriate inclusion of polypropylene fibres in the mix and/or by protecting the exposed concrete surface with a thermal barrier. There are three methods of assessment of fire resistance: (a) fire testing; (b) prescriptive methods, which are rigid; and (c) performance‐based methods, which are flexible. Performance‐based methods can be classified into three categories of increasing sophistication and complexity: (a) simplified calculations based on limit state analysis; (b) thermomechanical finite element analysis; and (c) comprehensive thermohydromechanical finite element analysis. It is only now that performance‐based methods are being accepted in an increasing number of countries.

FIRE PROTECTION IN RELIGIOUS MONUMENTS: ON THE EXAMPLE OF NOTRE-DAME DE PARIS AND THE CATHEDRAL OF ST. PETER AND ST. PAUL IN NANTES, FRANCE

Treasures gutted by fire. Fire safety design awareness as a consequence of historic building accidents and disasters

Notre-Dame de Paris as a validation case to improve fire safety modelling in historic buildings

Structural Fire Risk for Heritage Buildings by the Performance-Based Engineering Format

A STUDY ON THE CRIME AND DISASTER PREVENTION MEASURES FOR HISTORIC MONUMENTS IN FRANCE

Revealing the iron skeleton of Notre-Dame de Paris. Methodologies and issues of archaeological and analytical investigations following the blaze

A multi-model structural analysis of the vaults of Notre-Dame de Paris Cathedral after the 2019 fire and a proposal for a hybrid model merging continuum and discrete approaches

Material Testing of Historic Bricks and Mortars in Degraded Masonry Structures

Fire Protection and Fire Safety Design of New Zealand Heritage Building

Optimizing Building Rehabilitation through Nondestructive Evaluation of Fire-Damaged Steel-Fiber-Reinforced Concrete

Green Structural Retrofitting Materials for Fire-Damaged Reinforced Concrete Buildings: Advances in Sustainable Repair of Distressed Buildings

Avoiding predictable surprises: Lessons from the fire at Notre Dame de Paris

Effect of fire on concrete and concrete structures

Damage Detection and Safety Assessment on Bridge 5tructure after Fire Accident

Response to fire of concrete structures that incorporate FRP

Experimental investigation on the effect of natural fire exposure on the post‐fire behavior of reinforced concrete beams using electric radiant panel

ANALYSIS OF MODERN METHODS FOR PREVENTING THE SPREAD AND EXTINGUISHING FIRES

Organizational, Design and Technology Issues in the Process of Protection of Underground Historic Monuments/ Probelmy Organizacyjne, Projektowe I Technologiczne W Procesie Zabezpieczania Zabytkowych Podziemi

Structural study of the Notre-Dame ancient charpente

Post-fire assessment of composite steel-concrete box-girder bridges: Lessons from a recent incident

A Method of Evaluating the Destruction of a Reinforced Concrete Hollow Core Slab for Ensuring Fire Resistance