Abstract:The Himalayan belt is highly susceptible to landslides since majority of slopes comprise of highly weathered and deformed rocks with unfavourable orientation of structural discontinuities. Inappropriate planning of road-cutting often weakens the existing hill slopes, often triggering slides due to antecedent rainfall or earthquake occurrence. In the present study, a road stretch (~25 km length) along the National Highway (NH-58) between Shivpuri to Kaudiyala in Garhwal Himalayas of Uttarakhand, India has been studied which includes a mix of stable, partially stable and unstable road-cut slopes. Various rockmass classification techniques such as Geological Strength Index (GSI), Rock Mass Rating (RMR basic ) , Slope Mass Rating (SMR), Continuous Slope Mass Rating (CSMR) and Q-slope have been used for qualitative slope stability assessment. A quantified slope stability analysis by deterministic approach of all these studied road-cut slopes has been carried out using two-dimensional finite element method. Further, a comparative study has been performed between qualitative and quantified outcomes of the stability analysis. Finally, following the slope support guidelines chart based on SMR, stability analyses of two significant road-cut slopes have been carried out to understand their practical implications. It has been concluded that both SMR and CSMR techniques showed similar results for the stability grades of the studied slopes. However, these classification techniques are more effective for rapid assessment of slope stability, whereas the deterministic approach through finite element analysis is more prudent for designing any slope stability measures. Therefore, the presented methodology will be useful for a critical assessment of slope stability vis-à-vis to prepare a guideline for selection of appropriate design of control measures. Research highlights Rock mass classification techniques such as Geological Strength Index (GSI), Rock Mass Rating (RMR basic ) , Slope Mass Rating (SMR), Continuous Slope Mass Rating (CSMR) and Q-slope have been used for qualitative slope stability assessment. A quantified slope stability analysis of all these studied road cut slopes has been carried out using 2-dimensional finite element method. Finally, a comparative study has been performed between qualitative and quantified outcomes of the stability analysis. Further, following the slope support guidelines chart based on SMR (Romana, 1985), stability analysis of two significant road cut slopes has been carried out to exhibit their practical implications.

Pre and Post Earthquake Slope Stability Analysis Using Equivalent Linear Method – a Case Study of Jure Landslide

Probability Analysis of Submarine Landslides Based on the Response Surface Method: A Case Study from the South China Sea

Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

Stability Analysis of Multistage Loess Slope Under Earthquake Action Based on the Pseudo-Static Method

Stability Analysis of Seismic Slope Based on Relative Residual Displacement Increment Method

Geophysical and numerical stability analysis of landslide incident

A comparison of slope stability assessment techniques using different rock mass classification systems and finite element method (FEM): A case study from the Garhwal Himalayas, India

Slope stability analysis of deep-seated landslides using limit equilibrium and finite element methods in Debre Sina area, Ethiopia

A Procedure for Comprehensive Analysis of Slope Failure During and Post Mainshock

A new method of assessing the stability of anti-dip bedding rock slopes subjected to earthquake

Applicability Analysis of Soil Slope Stability Method under Action of Seismic

Stability analysis of earthquake-induced rock slope based on back analysis of shear strength parameters of rock mass

Reliability Analysis on Permanent Displacement of Earth Slopes Using the Simplified Bishop Method

Limit Equilibrium Analysis of Sliding Block Stability under Earthquake

Failure Mechanism Analysis of Loess Slope Under the Coupling Effect of Rainfall and Earthquake Using Shaking Table Test

3D SEM Approach to Evaluate the Stability of Large-Scale Landslides in Nepal Himalaya

Numerical analysis of the precursory information of slope instability process with constant resistance bolt

Probabilistic investigation of the seismic displacement of earth slopes under stochastic ground motion: A rotational sliding block analysis

Reliability analysis of slopes reinforced by frame-anchor structures under earthquake conditions

Himalayan rock slope stability investigation using empirical and numerical approach along NH-44 of Jammu and Kashmir, India

A Pseudo-dynamic Approach for Seismic Stability Analysis of Rock Slopes in Hoek–Brown Media