Abstract:Landslide susceptibility (LSI) modeling of Darjeeling–Sikkim Himalaya is performed by integrating 28 causative factors on 28C28 combinations on Geographical Information System (GIS) following analytic hierarchy process (AHP)-based multicriteria decision protocol, logistic regression (LR)-based multivariate technique, machine learning data-driven random forest (RF) and artificial neural network (ANN) methods wherein the terrain is classified into 'None' (with: 0.0 < LSI ≤ 0.17), 'Low' (with: 0.17 < LSI ≤ 0.34), 'Moderate' (with: 0.34 < LSI ≤ 0.51), 'High' (with: 0.51 < LSI ≤ 0.68),'Very High' (with: 0.68 < LSI ≤ 0.85) and 'Severe' (with: 0.85 < LSI ≤ 1.00) susceptible zones as validated through standard statistical accuracy tests and direct cross-correlation analysis of all the susceptible zonation maps generated by drawing comparison with the 30% landslide inventory test data. The best integrated thematic RF-based LSI vector layer with an accuracy level of 0.871, in turn, on integration with the vulnerability components like population density, number of households, building types, building height and building density has demarketed approximately 21% of the region under 'Very High' to 'Severe' socioeconomic risk zone while about 36% area are classified under 'Very High' to 'Severe' structural risk zone as implicated by devastating landslide hazards in the region. Ground Penetrating Radar Survey has been conducted on all the slopes in the 'Very High to Severe' landslide susceptible zones wherein near-surface lithologic setting, presence of paleo-slopes and microstructural features like fractures/faults and poorly stratified debris flow have been imaged that provided favorable subsurface conditions for slope failure. Finite element method-based slope failure analysis for Newmark displacement estimates factor of safety (FoS) value that acts as the proxy in defining the degree of slope instability is seen to vary between 1.905 and 2.357 in the 'Low to Moderate' landslide susceptible zone while it ranges between 1.051 and 1.652 in the 'High' landslide susceptible zone and between 0.649 and 1.349 in the 'Very High to Severe' landslide inventory subset along the slopes under both gravity loading and seismic shaking in the terrain. The slope stability analysis puts the yield acceleration between 0.0012 and 0.11984 m/s2 and the total deformation between 0.0027 and 1.4484 m. All these parameters in the classified landslide susceptible zones in unison demonstrate how unstable are the terrain slopes in the 'High to Severe' landslide susceptible zones.

3D SEM Approach to Evaluate the Stability of Large-Scale Landslides in Nepal Himalaya

3D-FEM Modeling and Postprocessing for Landslide

Evaluating Slope Stability with 3D Limit Equilibrium Technique and Its Application to Landfill in China

Three-Dimensional Spectral Element Method Implementation for Evaluating Rooted Soil Behavior in Slope Stability Analysis

Physics-based large-deformation analysis of coseismic landslides: A multiscale 3D SEM-MPM framework with application to the Hongshiyan landslide

Slope stability analysis of deep-seated landslides using limit equilibrium and finite element methods in Debre Sina area, Ethiopia

An Integrated SEM-Newmark Model for Physics-Based Regional Coseismic Landslide Assessment

Three-dimensional strength reduction and two-dimensional limit equilibrium methods of slope stability analysis

Regional-scale Assessment of Earthquake-Induced Slope Displacement Considering Uncertainties in Subsurface Soils and Hydrogeological Condition

An Infinite Slope Model Considering Unloading Joints for Spatial Evaluation of Coseismic Landslide Hazards Triggered by a Reverse Seismogenic Fault: A Case Study of the 2013 Lushan Earthquake

Remote sensing GIS-based landslide susceptibility & risk modeling in Darjeeling–Sikkim Himalaya together with FEM-based slope stability analysis of the terrain

DISCRETE ELEMENT MODELING AND SIMULATION OF 3-DIMEN-SIONAL LARGE-SCALE LANDSLIDE-TAKING XINMOCUN LANDSLIDE AS AN EXAMPLE

Three-dimensional distance potential discrete element method for the numerical simulation of landslides

Study on mechanism of retrogressive slope failure using artificial rainfall

Seismic-induced surficial failure of cohesive slopes using three-dimensional limit analysis: A case study of the Wangjiayan landslide in Beichuan, China

A comparison of slope stability assessment techniques using different rock mass classification systems and finite element method (FEM): A case study from the Garhwal Himalayas, India

Seismic slope stability and failure process analysis using explicit finite element method

Rainfall-triggered waste dump instability analysis based on surface 3D deformation in physical model test

Evaluation of statistical modeling (SM) approaches for landslide susceptibility mapping: geospatial insights for Bhutan

Assessing Slope Stability with an Improved 3D Numerical Manifold Method

Stability Assessment of Shallow Soil Landslide and Activating Rainfall Threshold