Abstract:Fabrication of the composite polymer electrolyte films via solution casting approach. A detailed account of the poly(vinylidene difluoride‐co‐hexafluoropropylene) (PVDF‐HFP)/succinonitrile (SN)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) based solid polymer electrolytes (SPEs) of various compositions is reported. SN is incorporated as plasticizer, while LiTFSI is employed as the source of lithium ions. Fourier transfer infrared (FTIR) spectroscopy reveals the formation of polar and electroactive γ crystal phase by PVDF in pristine PVDF‐HFP and the prepared SPE films. FTIR further confirms the interaction between the host polymer and the salt and between the salt and the plasticizer. The interaction between the salt and plasticizer suggests that SN not only offers the plasticization effect but also facilitates salt dissociation. The ion conductivity increases with increasing salt content up to 20 wt% but beyond that concentration a decline in ion conductivity is observed, which could be attributed to the ion pair association or cluster formation due to the excess salt concentration that reduces the availability of free ions and ultimately leads to the reduction in ion conductivity. After including SN in the SPE formulation, electrochemical impedance spectroscopy reveals a substantial increase in room temperature ion conductivity of the SPE from ~1.08 × 10−5 S cm−1 for pristine SPE with 20 wt% salt to ~2.7 × 10−4 S cm−1 for plasticized SPE with 40 wt% SN and 20 wt% salt. This is attributed to the plasticizing effect of SN that enhances ion mobility through the matrix and to the increased charge carrier concentration (SN facilities salt dissociation). The fabricated SPEs exhibit a significant enhancement in ion conductivity with increasing temperature and the maximum ion conductivity of 1.1 × 10−3 S cm−1 is attained at 393 K by plasticized SPE with 40 wt% SN content. The ion conductivity of all the prepared SPEs follows the temperature dependent Arrhenius behavior, suggesting the thermally activated ion hopping mechanism of ionic conduction. Further, the plasticized SPEs display near unity ion transference number indicating the predominance of the ionic mode of conduction. The dielectric and electric modulus analysis reveal a faster relaxation phenomenon and hence higher ion conductivity of the prepared SPEs with increasing salt and plasticizer content.

Do non-coordinating polymers function as host materials for solid polymer electrolytes? The case of PVdF-HFP

Effects of Components in Solvent-Enhanced PVDF-HFP-Based Polymer Electrolyte on Its Electrochemical Performance

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Effect of succinonitrile on the structural, ion conductivity, and dielectric properties of PVDF‐HFP based solid polymer electrolytes

Salt Dissociation and Localized High-concentration Solvation by Interface of Fluorinated Gel and Polymer Solid Electrolyte

Structure, thermal and electrical properties of PVDF-HFP/LiBOB solid polymer electrolyte

Polymer electrolytes based on interactions between [solvent-Li+] complex and solvent-modified polymer

Fabrication and characterization of Zn-ion-conducting solid polymer electrolyte films based on PVdF-HFP/Zn(Tf)2 complex system

Ionic solid-like conductor-assisted polymer electrolytes for solid-state lithium metal batteries

Composition and Structure Design of Poly(vinylidene fluoride)‐Based Solid Polymer Electrolytes for Lithium Batteries

Crystallinity and morphology of PVdF–HFP-based gel electrolytes

Modified Poly(vinylidene fluoride- co -hexafluoropropylene) Polymer Electrolyte for Enhanced Stability and Polymer Degradation Inhibition toward the Li Metal Anode

Poly(β‐amino ester) based solid polymer electrolytes for lithium‐ion batteries

Building Up Ion-Conduction Pathways in Solid Polymer Electrolytes Through Surface and Pore Functionalization of PVDF Porous Membranes with Ionic Conductors

Dielectric polymer based electrolytes for high-performance all-solid-state lithium metal batteries

Investigation on PVDF-HFP microporous membranes prepared by TIPS process and their application as polymer electrolytes for lithium ion batteries

Phase behavior of binary and ternary fluoropolymer (PVDF-HFP) solutions for single-ion conductors

High Performance Ternary Solid Polymer Electrolytes Based on High Dielectric Poly(vinylidene fluoride) Copolymers for Solid State Lithium-Ion Batteries

Solid Polymer Electrolytes Regulated by Ion-Dipole Interactions for High Voltage Lithium Batteries

Designing Weakly Solvating Solid Main-Chain Fluoropolymer Electrolytes: Synergistically Enhancing Stability toward Li Anodes and High-Voltage Cathodes

Intermolecular Chemistry in Solid Polymer Electrolytes for High‐Energy‐Density Lithium Batteries