Abstract:There is an increasing need for fast and reliable analytical methods for the determination of chemical forms of elements in environmental samples. The interest in chromium is driven by the fact that its toxicity depends on its oxidation state. Although chromium (III) is essential for mammals to maintain their metabolism of proteins, fats, and carbohydrates, chromium (VI) is toxic to humans. For chromium speciation, several costly analytical methods coupling separation methods with atomic absorption and emission spectroscopy have been developed. This article presents the online robotic discrete analyser procedure with the 1,5 diphenylcarbazide (DPC) method for the speciation of Cr (III) and Cr (VI). Cr (III) was determined by difference since it does not interfere with the reaction of Cr (VI)-DPC. Chromium (VI) and total chromium were characterised sequentially (after online oxidation of Cr (III) by Cerium (Ce (IV)). The calibration graphs were linear under experimental conditions up to 1 mg/L Cr (VI) and 2 mg/L total Cr with correlation coefficient R2, 0.9997 and 0.9999 respectively. At a signal-to-noise ratio of three, the detection limits were 0.004 mg/L Cr (VI) and 0.015 mg/L total Cr. Good agreement between the real values of certified reference materials and the chromium species content was obtained in this study. The method was precise with a percentage relative standard deviation of less than 2 for hexavalent chromium and total chromium. The t-stat demonstrates that there was no significant difference between the developed robotic discrete analyser method and the ICP-MS method. Except for effluent water, which had recoveries between 65 and 75 % in the assessment of the devised method's selectivity, the overall percentage of recoveries fell between 90 and 110 %, which was generally satisfactory. This method proved to be appropriate for its intended use.

Determination of Chromium(VI) with Screen‐Printed ex‐situ Bismuth film electrodes by adsorptive stripping voltammetry

A Miniaturized Electrochemical System for High Sensitive Determination of Chromium(vi) by Screen-Printed Carbon Electrode with Gold Nanoparticles Modification

Studies on the stripping voltammetric determination and speciation of chromium at a rotating-disc bismuth film electrode

Determination of Trace Chromium by Square-Wave Adsorptive Cathodic Stripping Voltammetry at an Improved Bismuth Film Electrode

Electrochemical Sensor Based on Glassy Carbon Electrode Modified with Carbon Nanohorns (SWCNH) for Determination of Cr(VI) via Adsorptive Cathodic Stripping Voltammetry (AdCSV) in Tap Water

Characterization By Modified Cyclic Biomass Voltammetry for the Reduction of Chromium in Solution with Carbon Paste Electrodes

Determination of trace amount of bismuth(III) by adsorptive anodic stripping voltammetry at carbon paste electrode

Determination of Trace Antimony by Square-Wave Adsorptive Cathodic Stripping Voltammetry at an Ex Situ Prepared Bismuth Film Electrode

Selective, peroxidase substrate based “signal-on” colorimetric assay for the detection of chromium (VI)

ADSORPTIVE STRIPPING VOLTAMMETRIC STUDY OF SCANDIUM–ALIZARIN COMPLEXAN COMPLEX AT A CARBON PASTE ELECTRODE

Spectrophotometric Determination of Chromium in Waste Water and Soil.

A new surface molecularly imprinted polyacrylamide nanoprobe for trace Cr(VI) with RRS technique

A Micro Electrochemical Sensor Based on Bismuth-Modified Mesoporous Carbon for Hexavalent Chromium Detection

High Sensitivity and Reproducibility of a Bismuth/Poly(bromocresol Purple) Film Modified Glassy Carbon Electrode for Determination of Trace Amount of Cadmium by Differential Pulse Anodic Stripping Voltammetry

Ultrasensitive Photoelectrochemical Determination of Chromium(vi) in Water Samples by Ion-Imprinted/formate Anion-Incorporated Graphitic Carbon Nitride Nanostructured Hybrid.

Separation and preconcentration system based on ultrasonic probe-assisted ionic liquid dispersive liquid-liquid microextraction for determination trace amount of chromium(VI) by electrothermal atomic absorption spectrometry

Determination of trace amount of antimony (III) by adsorption voltammetry on carbon paste electrode

A convenient colorimetric assay for Cr(VI) detection based on homogeneous Cu(II)-GMP system with oxidoreductase-like activity

Chitosan-adhered graphene/nano iron tetroxide carbon paper electrode for the detection of hexavalent chromium

Determination of chromium species in water using diphenylcarbazide with a sequential spectrophotometric discrete robotic analyser

Determination of Lead(II) Using Screen‐Printed Bismuth‐Antimony Film Electrode