Abstract:The widespread use of thermoplastic polymeric materials in various industrial fields has shown considerable interest in understanding the frictional and wear behavior. Among these polymers, polytetrafluoroethylene, also called PTFE, is a high-performance plastic that offers high chemical and thermal resistance and low friction. Additives such as fiberglass, carbon and graphite fillers are added to PTFE to significantly increase thermal conductivity, stiffness and self-lubricating properties. The materials subjected to the experimental analysis were pure PTFE, PTFE + 15% fiberglass, PTFE + carbon-graphite which slipped, under conditions of dry friction, on a sample of non-alloy steel construction SR EN 10025 from 1994. The tests were performed on a pin-on-disc tribometer. The effect of loading and sliding speed on the tribological properties of the polymer / steel combination under dry slip conditions was investigated and the specific wear rate for the experimental conditions was evaluated. The tests were performed at loads of the pin of Fn1=1N, Fn2=3N, Fn3=5N and Fn4=10N and sliding speeds of 1=1m/s, 2=3m/s. The results obtained indicated that the coefficient of friction decreases with increasing load. The wear rate for the analyzed materials was between 10-13...10-15 m2/N, the fiberglass reinforced PTFE material having the lowest wear rate. The present paper, through a comparative analysis of the friction and wear behavior, highlights the effects that the ingredients introduced in the basic material have, under the action of the exploitation factors (loading, sliding speed).

Experimental and modelling investigation on the fretting wear of PTFE with and without electron-beam irradiation

A Study on the Mechanical and Tribological Properties of Carbon Fabric/PTFE Composites

Tribological properties of PTFE/Kevlar fabric composites under heavy loading

Molecular Dynamics Simulation and Finite Element Method Investigation of PTFE/carbon Fiber Composite Tribological Properties

Fretting wear resistance mechanism of transferred film from organic high molecular materials

An investigation of fretting wear behaviors of bonded solid lubricant coatings

Fretting Wear Behavior of Fluorine Rubber and Short Carbon Fiber Reinforced Fluorine Rubber Matrix Composites

Electron irradiation enhanced wear resistance and hardness of polytetrafluoroethylene (PTFE)

Experimental Studies on Fretting Wear Behavior of PVDF Piezoelectric Thin Films.

Variable cycle fretting conditions meditated wear behavior and mechanism in a self-lubricating composite coating on TC21 titanium alloy substrate

Investigation of the effect of the cut parameter on the machining performance of PTFE cutting

Fretting Friction and Wear Behavior of Polymer Composites

Ti-6Al-4V fretting wear and a quantitative indicator for fretting regime evaluation

Tribological and Mechanical Behavior of Graphite Composites of Polytetrafluoroethylene (PTFE) Irradiated by the Electron Beam

Tribological properties of PTFE/PPS films deposited on the ultrasonic rolling textured substrates by electrohydrodynamic atomization under dry reciprocating sliding

Torsional Tribological Behavior and Torsional Friction Model of Polytetrafluoroethylene against 1045 Steel

Investigation of Tribological Behavior of Polytetrafluoroethylene/graphene Composite

Comparative Study on the Frequency and Wear of Thermoplastic Polymeric Materials Based on PTFE

Study of fretting wear mechanisms of complete contacts

Preparation and tribological behavior of polytetrafluoroethylene/metal mesh composites with sandwich structure

Experimental investigation on dry frictional behavior of the two self-lubricating composites under heavy loading conditions