Abstract:A vacuum insulation panel (VIP) is an inorganic composite insulation panel with a thermal conductivity of almost 0.004 W/(m•K) and a Class A fire resistance rating (noncombustible) that can achieve both heat preservation and fire protection. However, the application of VIPs in the construction industry still has many problems that need to be studied experimentally. In this paper, the building environment cabin is used to simulate wall insulation systems with three different insulation materials or construction methods, including pasted VIP boards, dry-hung composite VIP boards, and extruded polystyrene (XPS) insulation boards, and studying them in different working conditions, such as winter, summer, dry and wet, and assess the insulation performance under adverse conditions such as punctures. The conclusions are as follows: (1) In the thermal resistance test, considering that the heat flow on the surface of the envelope structure is susceptible to external disturbances, the average value of the heat flow on the indoor and outdoor surfaces of the structure should be taken into account when calculating the heat resistance of the envelope structure; (2) the test error of the working conditions under summer changing temperature conditions is greater than the constant temperature working conditions in winter; (3) the thermal resistance of the dry-hung VIP wall is greater than that of the pasted VIP wall because the static air interlayer behind the dry-hung VIPs causes the insulation effect to greatly increase; (4) the measured thermal resistance with the 50 mm pasted XPS is 32% lower than that of the wall with the 12 mm pasted VIPs; (5) after the VIP is punctured, its thermal resistance will be greatly reduced. In a wet environment, the extent of the decline will further increase.

Experimental investigation of methods to reduce outgassing from core materials in the fabrication process of transparent vacuum insulation panels

Experimental study on insulation performance of structured-core transparent vacuum insulation panels for different core materials

An Energy-Efficiency, Performance Study of, Vacuum Insulation Panels

Research on the Design and Thermal Performance of Vacuum Insulation Panel Composite Insulation Materials

Study on the temperature dependence of gas permeation and adsorption behavior of the vacuum insulation panel with getter materials

Effective thermal performance analysis of vacuum insulation panel with metal-less film and infrared-dried core material

Optimization of Glass Fiber Based Core Materials for Vacuum Insulation Panels with Laminated Aluminum Foils As Envelopes

Vacuum Insulation Panels: Analysis of the Thermal Performance of Both Single Panel and Multilayer Boards

A new low-temperature hermetic composite edge seal for the fabrication of triple vacuum glazing

Preparation and Characterization of a Type of Green Vacuum Insulation Panel Prepared with Straw Core Material

Prediction of thermal performance of vacuum insulation panels (VIPs) with micro-fiber core materials

Thermal insulation performance of an advanced photovoltaic vacuum glazing: A numerical investigation and simulation

Comparative life cycle assessment of different vacuum insulation panel core materials using a cradle to gate approach

Vacuum Insulation Panel Production with Ultralow Thermal Conductivity—A Review

Experimental study of the thermal performance of a building wall with vacuum insulation panels and extruded polystyrene foams

Development of a technology for manufacturing a heat-shielding structure on nitrogen cryocontainers, excluding heat transfer through gas

Numerical analysis and experimental investigation on thermal bridge effect of vacuum insulation panel

Numerical Study on the Thermal Insulation of Smart Windows Embedded with Low Thermal Conductivity Materials to Improve the Energy Efficiency of Buildings

Experimental investigation of high-temperature insulation performance of vacuum encapsulated ceramic fiber-board

Green and sustainable kapok fibre as novel core materials for vacuum insulations panels

Correlation between the Thermo-physical Properties and Core Material Structure of Vacuum Insulation Panel: Role of Fiber Types