Anion exchange membrane water electrolysis: Numerical modeling and electrochemical performance analysis

F. Moradi Nafchi,E. Afshari,E. Baniasadi

DOI: https://doi.org/10.1016/j.ijhydene.2023.05.173

IF: 7.2

2023-06-09

International Journal of Hydrogen Energy

Abstract:In this paper, a three-dimensional numerical model is developed for an anion exchange membrane electrolyser cell (AEMEC) with a double serpentine flow field pattern. The focus on the AEMEC is due to its benefits, including the solid membrane, inexpensive catalysts and membrane, and high stability. The effect of important operating parameters, i.e. cell temperature and cathode pressure, on the performance of the electrolyser is numerically modeled by considering different causes of performance degradation . The polarization curve, uniformity index, and the distribution of the hydrogen concentration, current density, temperature, and pressure in different operating conditions are presented. By increasing the operating temperature and decreasing the cathode pressure, the voltage of the elctrolyser decreases. Due to the higher concentration of water at the inlet of the cathode channel, more hydrogen is produced, and the current density is higher. The maximum current density and hydrogen concentrations are 7868Am2 and 0.898molm3 , respectively, when the operating condition is set to the temperature of 343 K, the pressure of 1 bar, and the cell voltage of 1.85 V.

energy & fuels,electrochemistry,chemistry, physical

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to study the performance of anion - exchange membrane electrolyzers (AEMEC) under different operating conditions through numerical modeling and electrochemical performance analysis. Specifically, the author focuses on the following aspects:

1. **Verify the polarization curve**: Verify the polarization curve of the anion - exchange membrane electrolyzer through experimental data.
2. **Apply a three - dimensional numerical model**: Develop and apply a three - dimensional numerical model to simulate the behavior of the anion - exchange membrane electrolyzer.
3. **Study the influence of operating parameters**: Explore the influence of different operating parameters (such as temperature and cathode pressure) on the polarization curve.
4. **Optimize operating conditions**: Find the operating conditions that minimize the electrolyzer voltage, that is, a higher temperature and a lower cathode pressure.

### Research Background

With the increasing importance of energy issues and concerns about global warming and fossil fuel depletion, hydrogen energy has received extensive attention as a clean energy carrier. Water electrolysis is an important method for producing high - purity hydrogen and can be combined with renewable energy. Traditional alkaline electrolyzers and proton - exchange membrane electrolyzers each have their own advantages and disadvantages, and anion - exchange membrane electrolyzers combine the advantages of both and overcome their disadvantages.

### Main Findings

- **Polarization curve verification**: The polarization curve of the anion - exchange membrane electrolyzer was verified through experimental data.
- **Three - dimensional numerical model**: A three - dimensional numerical model was developed to simulate the behavior of the anion - exchange membrane electrolyzer in the double - serpentine flow field mode.
- **Influence of operating parameters**: The influence of important operating parameters such as temperature and cathode pressure on the electrolyzer performance was studied. The results show that increasing the operating temperature and decreasing the cathode pressure can reduce the electrolyzer voltage.
- **Optimal operating conditions**: At a temperature of 343 K, a pressure of 1 bar and a cell voltage of 1.85 V, the maximum current density is 7868 A/m², and the maximum hydrogen concentration is 0.898 mol/m³.

### Mathematical Formula Representation

To ensure the correctness and readability of the formulas, the following are some of the key formulas involved in the paper:

- **Current density distribution**:
\[
j_a = j_{a,\text{ref}} \left( \frac{C_{H_2}}{C_{H_2,\text{ref}}} \right)^{0.5} \exp\left(\frac{\alpha_a F}{R T} (\eta_a - \eta_c)\right)
\]
\[
j_c = j_{c,\text{ref}} \left( \frac{C_{O_2}}{C_{O_2,\text{ref}}} \right) \exp\left(\frac{\alpha_c F}{R T} (\eta_c - \eta_a)\right)
\]

- **Ohmic heat source term**:
\[
S_h = R_{\text{ohm}} I^2 - R_{a,\text{ch}} \eta_{\text{act}} + \eta_{\text{reaction}}
\]

- **Charge conservation equation**:
\[
\nabla \cdot (\sigma \nabla \phi) + S_\phi = 0
\]

These formulas help describe the physical and electrochemical processes in the anion - exchange membrane electrolyzer, thus providing a theoretical basis for understanding its performance.

### Conclusion

This study, through numerical modeling and experimental verification, has analyzed in detail the performance of anion - exchange membrane electrolyzers under different operating conditions, providing an important reference for optimizing their operating conditions.