Polycarbonate/Sulfonamide Composites with Ultralow Contents of Halogen-Free Flame Retardant and Desirable Compatibility

Hangfeng Yang,Hangbo Yue,Xi Zhao,Minzimo Song,Jianwei Guo,Yihua Cui,Juan P. Fernández-Blázquez,De-Yi Wang

DOI: https://doi.org/10.3390/ma13173656

IF: 3.4

2020-08-19

Materials

Abstract:A novel halogen-free flame retardant containing sulfonamide, 1,3,5,7-tetrakis (phenyl-4-sulfonamide) adamantane (FRSN) was synthesized and used for improving the flame retardancy of largely used polycarbonate (PC). The flame-retardant properties of the composites with incorporation of varied amounts of FRSN were analyzed by techniques including limited oxygen index, UL 94 vertical burning, and cone calorimeter tests. The new FR system with sulfur and nitrogen elements showed effective improvements in PC’s flame retardancy: the LOI value of the modified PC increased significantly, smoke emission suppressed, and UL 94 V-0 achieved. Typically, the composite with only 0.08 wt% of FRSN added (an ultralow content) can increase the limiting oxygen index (LOI) value to 33.7% and classified as UL 94 V-0 rating. Furthermore, the mechanical properties and SEM morphology indicated that the FRSN has very good compatibility with PC matrix, which, in turn, is beneficial to the property enhancement. Finally, the analysis of sample residues after burning tests showed that a high portion of char was formed, contributing to the PC burning protection. This synthesized flame retardant provides a new way of improving PC’s flame retardancy and its mechanical property.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The problems that this paper attempts to solve mainly focus on the following aspects:

1. **Improving the flame - retardant performance of polycarbonate (PC)**: Although polycarbonate has already shown good flame - retardant performance, such as a 25% limiting oxygen index (LOI) and a UL 94 V - 2 combustion test rating, in the rapidly developing automotive and electrical and electronic (E&E) industries, these performances are still difficult to meet more stringent requirements. Therefore, researchers hope to significantly improve the flame - retardant performance of PC by adding new halogen - free flame retardants.

2. **Reducing the amount of flame retardant added**: Traditional flame retardants usually require a relatively high amount of addition to achieve the desired flame - retardant effect, which not only increases the cost but may also affect the processing performance of the composite material. Therefore, it is very important to develop a flame retardant that can effectively improve the flame - retardant performance of PC with an extremely low amount of addition.

3. **Improving mechanical properties**: Many existing flame retardants often reduce the mechanical properties of PC, especially the impact strength, while improving its flame - retardant performance. This is because of the poor compatibility between the flame retardant and the PC matrix, resulting in uneven dispersion. Therefore, designing a flame retardant that can improve the flame - retardant performance without significantly reducing the mechanical properties is an important research goal.

4. **Improving compatibility and dispersibility**: In order to achieve the above goals, researchers hope to develop a flame retardant that can be well - compatible with the PC matrix and evenly dispersed. This can not only improve the flame - retardant effect but also avoid the decline in mechanical properties caused by the agglomeration of flame retardants.

For this purpose, researchers designed and synthesized a new halogen - free flame retardant, 1,3,5,7 - tetra (benzene - 4 - sulfonamide) adamantane (FRSN), and verified through experiments its significant improvement effect on the flame - retardant and mechanical properties of PC at an extremely low addition amount (only 0.08 wt%). Specifically, after adding 0.08 wt% FRSN, the LOI value of PC increased from 25.8% to 33.7% and reached the UL 94 V - 0 rating. At the same time, the good dispersibility and compatibility of FRSN in the PC matrix were also confirmed.