Abstract:Objectives: As promising alternative to current metallic biomaterials, the porous Mg scaffold with a 3-D open-pore framework has drawn much attention in recent years due to its suitable biodegradation, biocompatibility, and mechanical properties for human bones. This experiment's aim is to study the mechanical properties, biosafety, and osteogenesis of porous Mg-Zn alloy. Methods: A porous Mg-2Zn-0.3Ca (wt%) alloy was successfully prepared by infiltration casting, and the size of NaCl particles was detected by a laser particle size analyzer. The microstructure of the Mg-2Zn-0.3Ca alloy was characterized by the stereoscopic microscope and Sirion Field emission scanning electron microscope. X-ray computerized tomography scanning (x-CT) was used to create the 3-D image. The degradation rate was measured using the mass loss method and the pH values were determined together. The engineering stress-strain curve, compressive modulus, and yield strength were tested next. The bone marrow stromal cells (BMSC) were cultured in vitro. The CCK-8 method was used to detect the proliferation of the BMSC. Alkaline phosphatase (ALP) and alizarin red staining were used to reflect the differentiation effects. After co-culturing, cell growth on the material's surface was observed by scanning electron microscope (SEM). The cell adhesion was tested by confocal microscopy. Results: The obtained results showed that by using near-spherical NaCl filling particles, the porous Mg alloy formed complete open-cell foam with a very uniform size of pores in the range of 500-600 mu m. Benefitting from the small size and uniform distribution of pores, the present porous alloy exhibited a very high porosity, up to 80%, and compressive yield strength up to 6.5 MPa. The degradation test showed that both the pH and the mass loss rate had similar change tendency, with a rapid rise in the early stage for 1-2 day's immersion and subsequently remaining smooth after 3 days. In vitro cytocompatibility trials demonstrated that in comparison with Ti, the porous alloy accelerated proliferation in 1, 3, 5, and 7 days (P < 0.001), and the osteogenic differentiation test showed that the ALP activity in the experimental group was significantly higher (P = 0.017) and has more osteogenesis nodules. Cell adhesion testing showed good osteoconductivity by more BMSC adhesion around the holes. The confocal microscopy results showed that cells in porous Mg-based alloy had better cytoskeletal morphology and were larger in number than in titanium. Conclusions: These results indicated that this porous Mg-based alloy fabricated by infiltration casting shows great mechanical properties and biocompatibilities, and it has potential as an ideal bone tissue engineering scaffold material for bone regeneration.

In vivo biodegradation and biological properties of a Mg-Zn-Ca amorphous alloy for bone defect repair

Biosafety and Osteogenic Properties of a New Type of Absorbable Magnesium-Based Amorphous Alloy

In Vitro and in Vivo Evaluation of Novel Biodegradable Mg-Ag-Y Alloys for Use As Resorbable Bone Fixation Implant.

In Vitro and in Vivo Studies on As-Extruded Mg- 5.25Wt.%zn-0.6Wt.%ca Alloy As Biodegradable Metal

In Vitro and Vivo Biocompatibility and Degradability of Low-Alloyed Mg-Zn-Ca-MgO Composite As Bone Repair Biomaterials

Preparation and characterization of a new biomedical Mg-Zn-Ca alloy

Corrosion and bone healing of Mg-Y-Zn-Zr-Ca alloy implants: Comparative in vivo study in a non-immobilized rat femoral fracture model

An adaptive biodegradable zinc alloy with bidirectional regulation of bone homeostasis for treating fractures and aged bone defects

Biocompatibility of magnesium-zinc alloy in biodegradable orthopedic implants

Evaluation on the corrosion resistance, antibacterial property and osteogenic activity of biodegradable Mg-Ca and Mg-Ca-Zn-Ag alloys

The Influence of Yttrium and Manganese Additions on the Degradation and Biocompatibility of Magnesium-Zinc-based Alloys: in Vitro and in Vivo Studies

Development of New Medical Mg-Zn-Ca-Y Alloy and In-Vitro and In-Vivo Evaluations of Its Biological Characteristics

In Vitro and in Vivo Investigation on Biodegradable Mg-Li-Ca Alloys for Bone Implant Application

Mechanical and Biological Properties of a Biodegradable Mg-Zn-Ca Porous Alloy.

In vitro and in vivo assessment of the effect of biodegradable magnesium alloys on osteogenesis

Enhanced Mechanical Properties, Corrosion Resistance, Cytocompatibility, Osteogenesis, and Antibacterial Performance of Biodegradable Mg‐2Zn‐0.5Ca‐0.5Sr/Zr Alloys for Bone‐Implant Application

The Development of Binary Mg-Ca Alloys for Use As Biodegradable Materials Within Bone

In vivo biodegradation and biocompatibility of Mg-Zn alloys

Mechanical properties, biodegradability and cytocompatibility of biodegradable Mg-Zn-Zr-Nd/Y alloys

Microstructure, Mechanical Properties, in Vitro Degradation and Cytotoxicity Evaluations of Mg–1.5Y–1.2Zn–0.44Zr Alloys for Biodegradable Metallic Implants

Antimicrobial Bioresorbable Mg-Zn-Ca Alloy for Bone Repair in a Comparison Study with Mg-Zn-Sr Alloy and Pure Mg