Abstract:The refractory–slag–metal–inclusion multiphase reaction model was developed by integrating the refractory–slag, slag–metal, and metal–inclusion elementary reactions in order to predict the evolution of inclusions during the secondary refining processes. The mass transfer coefficient in the metal and slag phase, and the mass transfer coefficient of MgO in the slag were employed in the present multiphase reactions modeling. The “Effective Equilibrium Reaction Zone (EERZ) Model” was basically employed. In this model, the reaction zone volume per unit step for metal and slag phase, which is dependent on the ‘effective reaction zone depth’ in each phase, should be defined. Thus, we evaluated the effective reaction zone depth from the mass transfer coefficient in metal and slag phase at 1873 K (1600 °C) for the desulfurization reaction which was measured in the present study. Because the dissolution rate of MgO from the refractory to slag phase is one of the key factors affecting the slag composition, the mass transfer coefficient of MgO in the ladle slag was also experimentally determined. The calculated results for the variation of the composition of slag and molten steel as a function of reaction time were in good agreement with the experimental results. The MgAl2O4 spinel inclusion was observed at the early to middle stage of the reaction, whereas the liquid oxide inclusion was mainly observed at the final stage of the refining reaction. The content of CaO sharply increased, and the SiO2 content increased mildly with the increasing reaction time, while the content of Al2O3 in the inclusion drastically decreased. Even though there is slight difference between the calculated and measured results, the refractory–slag–metal multiphase reaction model constructed in the present study exhibited a good predictability of the inclusion evolution during ladle refining process.

Development of a Multi-oxide Kinetic Model to Study Inclusion Transient Evolution in Molten Steel: Application to Si–Mn Killed Steel

Simulation of Ladle Refining Reactions in Si–Mn‐Killed Steel

Thermodynamic Evaluation of Inclusion Formation during Cooling and Solidification of Low Carbon Si-Mn Killed Steel

A Kinetic Model for Oxide–Carbonitride Inclusion Heterogeneous Nucleation and Precipitation during Superalloy Solidification

Refractory–Slag–Metal–Inclusion Multiphase Reactions Modeling Using Computational Thermodynamics: Kinetic Model for Prediction of Inclusion Evolution in Molten Steel

Interaction of MnS inclusion behaviors and macrosegregation during solidification by multi-phase modelling

Numerical Model For Short-Time High-Temperature Isothermal Oxidation of Fe–Mn Binaries at High Oxygen Partial Pressure

Analysis of MnS Inclusions Formation in Resulphurised Steel via Modeling and Experiments

Modeling Study on the Evolution of Slag-Entrained Inclusions Containing La2O3 in a Calcium-Treated Aluminum-Killed Steel

Model for Inclusion Precipitation Kinetics During Solidification of Steel Applications in MnS and TiN Inclusions

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

Numerical Simulation of Macrosegregation in a 535 Tons Steel Ingot with a Multicomponent-Multiphase Model

Formation Mechanism of High‐MnO‐Content SiO2/SiO2–MnO–(CaO–Al2O3) Dual‐Phase Inclusions in Si–Mn‐Killed Steel

Inducing mechanism and model of the critical oxygen content in homogenized steel

Morphology and Composition of Inclusions in Si–Mn Deoxidized Steel at the Solid-Liquid Equilibrium Temperature

Development of a kinetic model for Ti‐bearing steel‐slag reaction

Numerical Simulation of Macrosegregation in Steel Ingots Using A Two-Phase Model

Dynamic mass variation and multiphase interaction among steel, slag, lining refractory and nonmetallic inclusions: Laboratory experiments and mathematical prediction

Prediction of Inclusion State in Molten Steel by Morphology and Appearance of Inclusions in Liquid Steel Samples

Non-metallic Inclusion Evolution in a Liquid Third-Generation Advanced High-Strength Steel in Contact with Double-Saturated Slag

Multiphase Modeling of Macrosegregation Formation in Steel Ingot