Abstract:One of the easiest and most common methods for effectively reducing building energy demand is the selection of adequate thermal insulation materials. Thermal insulation is a substantial contribution and an evident, logical and practical first stage toward improving energy performance, particularly in envelope-load-dominant structures located in difficult climate zones. Today's insulating materials come in a broad variety of sizes and shapes, each with its a own qualities. It is well acknowledged that material selection is one of the most difficult and time-consuming aspects of a construction project. Therefore, choosing the right insulation material is also a very important topic to increase energy efficiency. However, it is a complex problem with many criteria and alternatives. This study integrates three different multi criteria decision making methods, which are Fuzzy Best-Worst Method, CRiteria Importance Through Inter-criteria Correlation and Mixed Aggregation by COmprehensive Normalization Technique. In this study, the following eight criteria were taken into account in the evaluation: thermal conductivity, periodic thermal transmittance, specific heat, density, decrement factor, surface mass, thermal transmittance, and thermal wave shift. The first method will be used to find the subjective weights, while the second method will be used to find the objective weights. The third method will be used to rank the insulation materials. According to the results of the Fuzzy Best-Worst Method, the most important criterion was determined as thermal conductivity. According to the results of the CRiteria Importance Through Inter-criteria Correlation, the most important criterion was determined as thermal wave shift. According to the results of the Mixed Aggregation by COmprehensive Normalization Technique, the top 10 insulation materials are as follows: polyisocyanurate, polyurethane (1), polyurethane (2), wood fiber (1), kenaf, jute, cellulose (2), wood fiber (1), XPS (1) and XPS (2). According to the results of the proposed method, polyisocyanurate was determined as the best insulation material for healthier environment. This study makes two contributions to the literature: first, a new hybrid method was developed in this study. Secondly, in this study, the newly introduced Mixed Aggregation by COmprehensive Normalization Technique method was used.

Cost analysis of insulation materials used to increase energy performance in buildings with Net Present Value method

Calculation of optimum insulation thickness of external walls in residential buildings by using exergetic life cycle cost assessment method: Case study for Turkey

A multi-criteria decision-making method for thermal insulation material selection in nZEB level questioned affordable multifamily housings

Determination of optimum insulation thickness of building walls according to four main directions by accounting for solar radiation: A case study of Erzincan, Türkiye

Effect of thermal insulation on building energy efficiency in Turkey

The Energy Impact of Building Materials in Residential Buildings in Turkey

The potential of the effect of insulation and photovoltaic panel use in buildings on energy performance for Turkey and LCC analysis

Performance and Economical Analysis of Different Insulating Materials Used to Reduce the Heat Load of an Existing Residential Building

Optimising building envelope and insulation materials for energy efficiency and life-cycle cost in Cypriot residences

Optimization of external wall insulation thickness in buildings using response surface methodology

Determination of Optimum Insulation Thickness for Different Climatic Zones of Turkey

Thermal insulation materials in architecture: a comparative test study with aerogel and rock wool

Determination of optimum insulation thickness for building external walls with different insulation materials using environmental impact assessment

An integrated assessment of the financial and environmental impacts of exterior building insulation application

THE ANNUAL CO2 EMISSIONS AND ENERGY COSTS OF DIFFERENT EXTERIOR WALL STRUCTURES IN RESIDENTIAL BUILDINGS IN TÜRKİYE

Experimental performance assessment of a novel insulation plaster as an energy-efficient retrofit solution for external walls: A key building material towards low/zero carbon buildings

A New Hybrid MCDM Model for Insulation Material Evaluation for Healthier Environment

Cost-optimum analysis of building fabric renovation in a Swedish multi-story residential building

Comparative analysis of building insulation material properties and performance

Numerical investigation of the thermal behaviour of external multilayer walls to ensure the buildings retrofitting thermal insulation

Enhancing building wall thermal performance with phase change material and insulation: A comparative and synergistic assessment