Abstract:To study the instability and failure mechanism of tunnel face in composite stratum and the evolution law of supporting pressure in the areas with spring, this paper used two different types of transparent soil and a self-designed 3D model test system. Six large transparent soil model tests were carried out by considering different confined water heads of spring and tunnel burial depth. The optical laser and high-speed camera were controlled to move on a high-precision linear platform. CT scanning was performed to obtain the failure model under different conditions. The finite element method considering a two-way fluid–structure coupling was used to validate the model test. The research results indicate under spring, the support pressure curves can be divided into three stages: rapid decline, rebound-rise, and constant. There is no rebound-rise stage under the condition of no spring. With increased confined water heads or reduced tunnel burial depth, limit support pressure shows an increasing trend. 2D and 3D damage models for different working conditions were obtained by PIV technology and 3D reconstruction technology. If there is a spring, the maximum displacement moves to the top of the tunnel with the increase of water head and the failure mode is a combination of “silo shape” and “inverted prism”. When there is no spring, the maximum displacement appears at the interface of the soil layer, and the failure mode is a combination of “silo shape” and “wedge shape”. The presence or absence of springs and the change of the confined water head have no significant effect on the height of the loosening area. With the tunnel burial depth ratio of 0.5 to 2.0, the height of the loose area increases from 0.17 to 0.83 D, and the soil arch area develops outward.

Transparent soil model test and numerical study on the effect of adjacent spring on the stability of tunnel face in composite strata

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Numerical Modeling of Soil and Structure Behavior for Tunneling in Different Types of Soil

Face stability analysis of shield-driven tunnels shallowly buried in dry sand using 1-g large-scale model tests

Numerical Research on the Influence of Stress Release on Tunnel Face Stability

Model test study of the face stability of the shallow tunnel in the clay

A Modified Wedge-Prism Model for Calculating the Limit Support Pressure of a Shallow Shield Tunnel Face in Unsaturated Sandy Soil

Analysis of Influence of Deformation Modes of Retaining Structures on Deformation of a Side Shield Tunnel

Physical modeling of wetting-induced collapse of shield tunneling in loess strata

Study on instability mechanism of tunnel face in clay-gravel strata under confined water conditions based on DEM-CFD coupling method

Tunnel failure mechanism during loading and unloading processes through physical model testing and DEM simulation

3d Tunnel Face Stability Of Cross-River Shield Tunnel Considering Water Pressure

The Stability Analyses of Tunnel Faces in Saturated Soils with Soil Arching Effect

An analytical model for face stability of shield tunnel in dry cohesionless soils with different buried depth

Model test study on large deformation mechanism of thin-bedded metamorphic sandstone tunnel

Effect of tunnelling-induced ground loss on the distribution of earth pressure on a deep underground structure

An Improved 3d Wedge-Prism Model for the Face Stability Analysis of the Shield Tunnel in Cohesionless Soils

Model test and discrete element method simulation of tunnel face stability in sand-gravel inclined layered stratum

An analytical model for face stability of tunnels traversing the fault fracture zone with high hydraulic pressure

Face Stability of Shallow Shield Tunnels in Dry Sandy Ground: Model Tests, Discrete Element Method Simulations and Theoretical Model

Failure Performance of 3DP Physical Twin-Tunnel Model and Corresponding Safety Factor Evaluation