Abstract:Decreasing the number of cables that bring heat into the cryostat is a critical issue for all cryoelectronic devices. Especially, arrays of superconducting nanowire single-photon detectors (SNSPDs) could require more than $10^6$ readout lines. Performing signal processing operations at low temperatures could be a solution. Nanocryotrons, superconducting nanowire three-terminal devices, are good candidates for integrating sensing and electronics on the same technological platform as SNSPDs in photon-counting applications. In this work, we demonstrated that it is possible to read out, process, encode, and store the output of SNSPDs using exclusively superconducting nanowires. In particular, we present the design and development of a nanocryotron ripple counter that detects input voltage spikes and converts the number of pulses to an $N$-digit value. The counting base can be tuned from 2 to higher values, enabling higher maximum counts without enlarging the circuit. As a proof-of-principle, we first experimentally demonstrated the building block of the counter, an integer-$N$ frequency divider with $N$ ranging from 2 to 5. Then, we demonstrated photon-counting operations at 405 nm and 1550 nm by coupling an SNSPD with a 2-digit nanocryotron counter partially integrated on-chip. The 2-digit counter could operate in either base 2 or base 3 with a bit error rate lower than $2 \times 10^{-4}$ and a count rate of $10^7\,$s$^{-1}$. We simulated circuit architectures for integrated readout of the counter state, and we evaluated the capabilities of reading out an SNSPD megapixel array that would collect up to $10^{12}$ counts per second. The results of this work, combined with our recent publications on a nanocryotron shift register and logic gates, pave the way for the development of nanocryotron processors, from which multiple superconducting platforms may benefit.

Single-flux-quantum signal processors monolithically integrated with a superconducting nanostrip single-photon detector array

Microfiber-coupled superconducting nanowire single-photon detector for near-infrared wavelengths.

Single-Flux Quantum Readout Circuits for Photon-Number-Resolving Superconducting Nanowire Single-Photon Detectors

SFQ Amplified Circuit for Photon-Number-Resolving SNSPD Array

Readout Circuit Based on Single-Flux-Quantum Logic Circuit for Photon-Number-Resolving SNSPD Array

NbN Superconducting Nanowire Single-Photon Detector Fabricated on MgF2substrate

Ultra-broadband Microfiber-Coupled Superconducting Single-Photon Detector

Crosstalk-free operation of multi-element SSPD array integrated with SFQ circuit in a 0.1 Watt GM cryocooler

Self-aligned Multi-Channel Superconducting Nanowire Single-Photon Detectors.

A 16-channel fiber array-coupled superconducting single-photon detector array with average system detection efficiency over 60% at telecom wavelength

Self-aligned multi-channel superconducting nanowire avalanche photodetector

GHz detection rates and dynamic photon-number resolution with superconducting nanowire arrays

Approaching pixel-level readout of SNSPD array by inductor-shaping pulse

A 16-pixel NbN nanowire single photon detector coupled with 300 micrometer fiber

Superconducting-nanowire Single-Photon-detector Linear Array

Single-photon detectors on arbitrary photonic substrates

Simultaneous resolution of photon numbers and positions with series-connected superconducting nanowires

Operation of Multi-Pixel Radio-Frequency Superconducting Nanowire Single-Photon Detector Arrays

Highly efficient NbTiN nanostrip single-photon detectors using dielectric multilayer cavities for a 2-µm wavelength band

Nanocryotron ripple counter integrated with a superconducting nanowire single-photon detector for megapixel arrays

Gigahertz Detection Rates and Dynamic Photon-Number Resolution with Superconducting Nanowire Arrays