Abstract:Recent progress in the development of superconducting nanowire single-photon detectors (SNSPD) has delivered ex-cellent performance, and their increased adoption has had a great impact on a range of applications. One of the key characteristic of SNSPDs is their detection rate, which is typically higher than other types of free-running single-photondetectors. The maximum achievable rate is limited by the detector recovery time after a detection, which itself is linked to the superconducting material properties and to the geometry of the meandered SNSPD. Arrays of detectors biased individually can be used to solve this issue, but this approach significantly increases both the thermal load in the cryo-stat and the need for time processing of the many signals, and this scales unfavorably with a large number of detectors. One potential scalable approach to increase the detection rate of individual detectors further is based on parallelizing smaller meander sections. In this way, a single detection temporarily disables only one subsection of the whole active area, thereby leaving the overall detection efficiency mostly unaffected. In practice however, cross-talk between parallel nanowires typically leads to latching, which prevents high detection rates. Here we show how this problem can be avoided through a careful design of the whole SNSPD structure. Using the same electronic readout as with conventional SNSPDs and a single coaxial line, we demonstrate detection rates over 200 MHz without any latching, and a fibre-coupled SDE as high as 77%, and more than 50% average SDE per photon at 50 MHz detection rate under continuous wave illumination.

GHz detection rates and dynamic photon-number resolution with superconducting nanowire arrays

Gigahertz Detection Rates and Dynamic Photon-Number Resolution with Superconducting Nanowire Arrays

Enhanced Detection Rate and High Photon-Number Efficiencies with a Scalable Parallel SNSPD

Ultra-broadband Microfiber-Coupled Superconducting Single-Photon Detector

Microfiber-coupled superconducting nanowire single-photon detector for near-infrared wavelengths.

A 16-channel fiber array-coupled superconducting single-photon detector array with average system detection efficiency over 60% at telecom wavelength

High-Performance Photon Number Resolving Detectors for 850-950 nm wavelengths

Simultaneous resolution of photon numbers and positions with series-connected superconducting nanowires

Resolving Photon Numbers Using Ultra-High-Resolution Timing of a Single Low-Jitter Superconducting Nanowire Detector

A High Speed and High Efficiency Superconducting Photon Number Resolving Detector

Kinetic Inductance and Jitter Dependence of the Intrinsic Photon Number Resolution in Superconducting Nanowire Single-Photon Detectors

Superconducting nanowire for single-photon detection: progress, challenges and opportunities

A 16-pixel NbN nanowire single photon detector coupled with 300 micrometer fiber

Superconducting Nanowire Single-Photon Detector with A System Detection Efficiency over 80% at 940-Nm Wavelength

Demonstration of sub-3 ps temporal resolution with a superconducting nanowire single-photon detector

Operation of parallel SNSPDs at high detection rates

Low-noise Balanced Homodyne Detection with Superconducting Nanowire Single-Photon Detectors

A Superconducting Nanowire Single Photon Detector on Lithium Niobate

Single-Flux Quantum Readout Circuits for Photon-Number-Resolving Superconducting Nanowire Single-Photon Detectors

Superconducting nanowire single-photon detectors for quantum information

Photonic Readout of Superconducting Nanowire Single Photon Counting Detectors