Abstract:Surface Review and Letters, Ahead of Print. The removal of metal in the form of sludge can be termed an ECM process, having primary salient features consisting of the tool, workpiece, power supply and electrolyte solution. ECM is a potential nontraditional machining process that includes too many factors contributing to process performance. Therefore, obtaining optimal factor combinations for higher efficiency is complex. In this research work, machining parameters are voltage, powder concentration and electrolyte concentration, based on which material removal rate (MRR) and surface roughness (SR) are derived. Regression analysis, signal-to-noise ratios and analysis of variance (ANOVA) are performed to determine the optimal levels and to examine the effects of machining parameters on MRR and SR. The results derived from the experiments noticed that the MRR decreases when the voltage level is increased and surface roughness decreases for the applied voltage. In case of an increase in powder concentration, MRR decreases from range 4 to 6 and further reduces to 6–8. In case of SR, it additionally decreases on the maximum level of powder concentration. In electrolyte concentration, the MRR decreases on the increment of electrolyte and increases after a short period of time; simultaneously SR is increased from range value 10–20 and decreased with a maximum level 20–30 of NaCl solution. A comparison of MOORA-PCA and TOPSIS-PCA demonstrates the superiority of TOPSIS over MOORA technique. Statistical results (95% confidence level) indicate that the voltage, powder concentration, and electrolyte concentration affect the surface roughness by 69.50%, 8.67% and 14.59% in the electrochemical machining of d3 die steel. Therefore, the optimum combination of process parameters corresponding to voltage: 45[math]V, powder concentration: 4[math]g/L, and electrolyte concentration: 10 NaCl/L, respectively, were found to yield the desired result. The prediction accuracy of the TOPSIS-PCA hybrid approach model is found better than MOORA-PCA technique.

Optimization of die design parameters in ECAP for sustainable manufacturing using response surface methodology

Multi-response optimization in face milling of EN-31 steel using analytical hierarchy process-based GRA

Optimization of ECAP parameters of ZX30 alloy using feature engineering assisted machine learning and response surface approaches

Process parameters optimization of EDM for hybrid aluminum MMC using hybrid optimization technique

Optimization of CNC End Milling Process Parameters of Low-Carbon Mold Steel Using Response Surface Methodology and Grey Relational Analysis

Hybrid Integration of Taguchi Parametric Design, Grey Relational Analysis, and Principal Component Analysis Optimization for Plastic Gear Production

Evaluation of machinability performance of T51603 using response surface methodology and grey relational analysis

A comparative study of machine learning and response surface methodologies for optimizing wear parameters of ECAP-processed ZX30 alloy

Parametric Optimization on Single Point Incremental Forming of Aluminum Alloy AA 2219-O using Response Surface Methodology

Experimental Investigations On The Electrochemical Machining Of D3 Die Steel Material And Multi-Objective Parameter Optimization

Optimization of wear parameters for ECAP-processed ZK30 alloy using response surface and machine learning approaches: a comparative study

Optimization of Process Parameters of Cyclic Expansion Extrusion Process for Effective Grain Refinement of Al-Mg-Si Alloy

Optimization of Deformation Behaviors during Continuous Forming Extrusion of C18150 Copper Alloy through Response Surface Methodology

Optimization of process parameters of powder mixed EDM for high carbon high chromium alloy steel (D2 steel) through GRA approach

Multi-Objective Optimization Of Edm Process Parameters Using Rsm-Based Gra And Topsis Method For Grade 6 Titanium Alloy

Optimization of Processing Parameters of Aluminum Alloy Cylindrical Parts Based on Response Surface Method during Hydromechanical Deep Drawing

Optimization of EDM Machining of High Carbon High Chromium Steel Using Zirconium and Nickel Powder Mixed Dielectric by Grey Relational Analysis

Investigating the Influence of Thermomechanical Equal Channel Angular Pressing (ECAP) Improved Die on AA-6061

Study and optimization of process parameters for deformation machining stretching mode

Optimization of Forming Parameters in Incremental Sheet Forming of AA3003-H18 Sheets Using Taguchi Method

Optimization of CNC-WEDM Parameters for AA2024/ZrB2 in situ Stir Cast Composites Using Response Surface Methodology with Desirability Function Technique