Abstract:One of the crucial aspects to achieving long lifetime and high-efficient SOCs (Solid oxide cells) is to enhance durability of the current devices. Degradation issues are typically associated with problems in both electrodes. For example, nickel-yttria stabilized zirconia (Ni-YSZ) hydrogen electrodes present under extreme conditions of high steam partial pressures, a low durability due to Ni oxidation resulting in lowered electronic conductivity and catalytic activity of the electrode. Ni agglomeration, depleting and micro crack in Ni-containing hydrogen electrode can also occur leading to a lower activity of the Ni-based electrodes as an SOEC fuel electrode. Furthermore, carbon deposition and sulfur poisoning on the Ni surface are also lead to cell performance degradation and poor durability. In addition, the performance of the oxygen electrode is also particularly more important in electrolysis mode than in fuel cell mode, as it is well established that electrochemically induced oxygen pressure increase at the electrolyte-oxygen electrode interface and subsequent membrane failure have been theoretically predicted and experimentally observed in SOEC mode. For example, several examples in the literature reported the presence on voids at the YSZ electrolyte, leading to delamination of the oxygen electrode. In this sense, lanthanide nickelates (Ln = La, Nd, Pr) have received considerable interest as materials for IT-SOFC electrodes and oxygen separation membranes, and they seem to be very attractive for electrolysis applications. The hyperstoichiometry of some oxygen electrode materials such as these Ruddlesden-Popper phases is believed to be favourable for effective oxygen evolution, as performance of these electrodes is enhanced in SOEC mode. Different strategies to develop optimized electrode structures as well as controlled operating conditions will be discussed in order to improve the durability of SOCs.

Time-Dependence of Microstructural Evolution and Performance Degradation of Ni/YSZ Electrode in Co-Electrolysis SOEC

Role of Initial Microstructure on Nickel-Ysz Cathode Degradation in Solid Oxide Electrolysis Cells

Degradation of Ni-YSZ Electrodes in Solid Oxide Cells: Impact of Polarization and Initial Microstructure on the Ni Evolution

Microstructure Evolution Analysis of Ni/YSZ Cermet Electrode using Cross-Sectional Model Cells

Performance Evolution of Ni-YSZ Anode-Supported SOFCs During Initial-Stage Operation

Ni migration of Ni-YSZ electrode in solid oxide electrolysis cell: An integrated model study

Degradation Issues in Solid Oxide Electrolysers

Review of factors affecting the performance degradation of Ni-YSZ fuel electrodes in solid oxide electrolyzer cells

Oxidation Process of Ni Cathode in CO2 Electrolysis in SOEC: X-Ray and DFT Study

Performance evolution analysis of solid oxide electrolysis cells operating at high current densities

Electrochemical characteristics of patterned nickel electrodes on single-crystal YSZ in CO/CO2 atmospheres for operating in fuel cell/electrolysis cell modes

Influence of Surface State on the Electrochemical Performance of Nickel-Based Cermet Electrodes during Steam Electrolysis

Failure Analysis of Ni-8YSZ Electrode under Reoxidation Based on the Real Microstructure

Carbon Monoxide/carbon Dioxide Electrochemical Conversion on Patterned Nickel Electrodes Operating in Fuel Cell and Electrolysis Cell Modes

Nickel Depletion and Agglomeration in SOFC Anodes During Long‐Term Operation

Long-term performance prediction of solid oxide electrolysis cell (SOEC) for CO2/H2O co-electrolysis considering structural degradation through modelling and simulation

Impact of yttria-stabilized zirconia contents in nickel cermet anodes for intermediate temperature-operated syngas-fueled thin film solid oxide fuel cells

Carbon Deposition on Patterned Nickel/yttria Stabilized Zirconia Electrodes for Solid Oxide Fuel Cell/solid Oxide Electrolysis Cell Modes

Effects of operating conditions on the performance degradation and anode microstructure evolution of anode-supported solid oxide fuel cells

Performance Evolution Analysis of a Solid Oxide Cell Operated in Fuel-Cell, Electrolysis and Cycle Modes

Ni / GDC Fuel Electrode for Low-Temperature SOFC and its Aging Behavior Under Accelerated Stress