Abstract:A novel coaxial mixer was proposed, which had an outer wall-scraping frame and a combined inner impeller consisting of a four-pitched-blade turbine paddle (PBT-4) and a Rushton turbine paddle (RT-6). Its heat transfer performance in Newtonian fluid under different operating modes (single rotation of inner impeller, corotation and counter-rotation) was experimentally investigated in a stainless steel agitated vessel with semicircle spiral jacket and ellipsoidal head by measuring the average heat transfer coefficient of the inner wall. Meanwhile, the wall temperature, the heat flow rate and the local heat transfer coefficient in the coaxial agitated vessel were determined with the help of numerical simulation. The results show that the heat transfer coefficient near the inner wall surface of the agitated vessel will increase with the increasing speed of the inner or outer impeller whether under single-shaft agitation or under coaxial agitation mode, whereas the effect of speed of the inner impeller on heat transfer is more obvious and efficient. Under the same conditions, the heat transfer of coaxial agitation is more efficient than that of single-shaft agitation, especially the local heat transfer coefficient on the upper and lower part of the agitated vessel, which is increased greatly. In addition, the local heat transfer coefficient varies with the axial position of the agitated vessel, and the heat transfer coefficient in zones between the upper and lower impeller is relatively high. The effect of the corotation mode and counter-rotation mode on heat transfer is of little difference, but the corotation mode is recommended owing to its advantage of low power consumption and good mixing performance.

Anchor agitator and a single-cone dryer with same

Hydrodynamics and mixing process in a horizontal self-cleaning opposite-rotating twin-shaft kneader

Mixing Intensification in a Horizontal Self-Cleaning Twin-Shaft Kneader with a Highly Viscous Newtonian Fluid

Hydrodynamics and Film Formation Characteristics in a Horizontal Self‐cleaning Twin‐shaft Kneader for Polymer Devolatilization

Numerical investigation on the intensification of coaxial slurry mixing systems

Numerical Study on the Synergistic Mechanism of Coaxial Mixers in Dense Solid-Liquid Mixing Systems

Design Model of Pan Rotary Dryer and Tube Rotary Dryer

Numerical Simulation of Hydrodynamics and Mixing Characteristics of High-Viscosity Non-Newtonian Fluid in Twin-Shaft Kneaders

Nanoparticle Deagglomeration Driven by a High Shear Mixer and Intensification of Low-Speed Stirring in a Viscous System

Microwave hot blast barrate drying apparatus

Material stirring device

Research on Sludge Drying Characteristics in a Double-Axis Paddle Dryer by Coupling Markov Chain and Penetration Theory

Research on Heat Transfer Performance of Coaxial Mixer with Inner Combined Impeller

Diverse-velocity Threshing Device with Double-axletree Flow

Research and Design of a New Rotary Blast Dryer

Multifield promotion-based coagulation and aggregation strengthening device and method for particulate matters

Mechanical stirring internal circulation resin ion exchange and adsorption reactor

The Connecting Method for the Spiral Blades of Concrete Mixer Truck

Direct-burning type gas drying cylinder

Rotating glue conveying device of automatic shearing gluing machine

Automatic shrimp peeling machine