Abstract:The settling process of cohesive sediment particles exists universally in nature and many engineering fields. Some of them have negative impacts, e.g., leading to the storage loss of reservoir, prolonging the duration of the reclamation project. Thus, understanding and quantifying cohesive sediments settling and flocculation processes are of great importance. In the present work, a three-dimensional model is applied to investigate the cohesive settling process numerically by computational fluid dynamics–discrete element method (CFD–DEM) approach. In the model, the cohesiveness of the sediment particle is modeled by implementing the van der Waals force. The simulation results are in good agreement with the experimental results, which demonstrate the ability of the current model to study the settling and flocculation process. For cohesive particles, the influence of polydispersity on structural density is discussed in two aspects: (a) the particle mean diameter d50 and (b) the geometric standard deviation d85/d15. Furthermore, the results show that the influence of these two parameters is more profound when a large Hamaker constant is applied. We also study the relationship between the maximum value of structural density and the Hamaker constant. The structure density is found to be significantly influenced by Hamaker constant when Hamaker constant is smaller than \(2.0\, \times \,10^{ - 20} \,{\text{J}}\). Besides, for the poly-dispersed system, different from non-cohesive particles, the segregation phenomenon is not obvious for poly-dispersed cohesive particles due to the flocculation phenomenon. Moreover, the excessive pore pressure in sediment bed does not dissipate instantaneously as the non-cohesive sediment bed. And with the increase of the Hamaker constant, the excessive pore pressure dissipation velocity of the sediment bed decreases. In this work, we study the flocculation phenomenon of cohesive particles. It’s found that the influence of cohesive force is more significant on small particles. Since with the reduction of the particle size, the inertial force decreases to a greater extent compared to the cohesive force, the particles’ motion is mainly determined by the cohesive force.

CFD-DEM modeling of particle dissolution behavior in stirred tanks

Simulation of Solid Suspension in a Stirred Tank Using CFD-DEM Coupled Approach

Modeling the Process of Cohesive Sediment Settling and Flocculation Based on CFD–DEM Approach

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

CFD-DEM Simulation of Fluidization of Polyhedral Particles in a Fluidized Bed

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Particle flocculation in a stirred tank: A microscopic test by coupled CFD-DEM approach

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

CFD Simulation of the Mixing and Dispersing of Floating Particles in a Viscous System

Quasi-steady-state modelling and characterization of diffusion-controlled dissolution from monodisperse prolate and oblate spheroidal particles

Development and Verification of Coarse‐grain CFD‐DEM for Nonspherical Particles in a Gas–solid Fluidized Bed

Super-quadric CFD-DEM modelling of chip-like particle-liquid flow in a rotary drum

CFD Prediction of the Critical Agitation Speed for Complete Dispersion in Liquid‐Liquid Stirred Reactors

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Study of sedimentation of non-cohesive particles via CFD-DEM simulations

CFD-DEM simulation of particle coating process coupled with chemical reaction flow model

Modeling of the dissolution phenomena of solid particles into an infinitely large medium from the analytical solutions of reaction–diffusion equations

CFD-DEM Coupling Model for Deposition Process Analysis of Ultrafine Particles in a Micro Impinging Flow Field